TECHNICAL DATA | ||
Rated input | 725 W | 725 W |
Output | 340 W | 340 W |
Voltage | 127 V~ | |
Dry wall screws up to max | 4 mm | 4 mm |
Setting range of depth gauge | ± 3,8 mm | ± 3,8 mm |
Universal reception | 1/4" 1/4" | 1,3 kg |
Weight without cable | 1,3 kg | |
Noise information |
|
|
Measured values determined according to EN 60745. |
|
|
Typically the | 98 dB (A) | 98 dB (A) |
Sound pressure level (K = 3 dB(A)) | ||
Sound power level (K = 3 dB(A)) | 109 dB (A) | 109 dB (A) |
Wear ear protectors! |
|
|
Vibration information |
|
|
Total vibration values (vector sum in the three axes) |
|
|
determined according to EN 60745. |
|
|
Vibration emission value ah | 2,9 m/s2 | 2,9 m/s2 |
Screwing | ||
Uncertainty K | 1,5 m/s2 | 1,5 m/s2 |
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns.
from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g)If devices are provided for the connection of dust |
extraction and collection facilities, ensure these are |
connected and properly used. Use of dust collection |
can reduce |
4) Power tool use and care |
a) Do not force the power tool. Use the correct power |
tool for your application. The correct power tool will |
do the job better and safer at the rate for which it was |
designed. |
b)Do not use the power tool if the switch does not turn |
it on and off. Any power tool that cannot be controlled |
with the switch is dangerous and must be repaired. |
c) Disconnect the plug from the power source and/or |
the battery pack from the power tool before making |
any adjustments, changing accessories, or storing |
power tools. Such preventive safety measures reduce |
the risk of starting the power tool accidentally. |
d)Store idle power tools out of the reach of children |
and do not allow persons unfamiliar with the power |
tool or these instructions to operate the power tool. |
Power tools are dangerous in the hands of untrained |
users. |
e) Maintain power tools. Check for misalignment or |
binding of moving parts, breakage of parts and any |
other condition that may affect the power tool’s |
operation. If damaged, have the power tool repaired |
before use. Many accidents are caused by poorly |
maintained power tools. |
f) Keep cutting tools sharp and clean. Properly |
maintained cutting tools with sharp cutting edges are |
less likely to bind and are easier to control. |
g)Use the power tool, accessories and tool bits etc. |
in accordance with these instructions, taking into |
account the working conditions and the work to be |
performed. Use of the power tool for operations different |
Appliances used at many different locations including open air should be connected via a residual current device of 30 mA or less.
When inserting or removing screws the workpiece should be securely held to prevent rotation.
Always disconnect the plug from the socket before carrying out any work on the machine.
Only
Keep mains lead clear from working range of the machine. Always lead the cable away behind you.
When working in walls ceiling, or floor, take care to avoid electric cables and gas or waterpipes.
SPECIFIED CONDITIONS OF USE
The screwdriver is suited for setting dry wall screws when fixing gypsum plaster boards to wood furring or metal furring.
Do not use this product in any other way as stated for normal use.
MAINS CONNECTION
Connect only to
The ventilation slots of the machine must be kept clear at all times.
Use only Milwaukee accessories and Milwaukee spare parts. Should components need to be replaced which have not been described, please contact one of our Milwaukee service agents.
SYMBOLS
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains- operated (corded) power tool or
1)Work area safety
a)Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b)Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c)Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
2)Electrical safety
a)Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
b)Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c)Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
d)Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
e)When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f)If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
3)Personal safety
a)Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
b)Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
c)Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
d)Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
e)Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
f)Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away
from those intended could result in a hazardous situation. |
5) Battery tool use and care |
a) Recharge only with the charger specified by the |
manufacturer. A charger that is suitable for one type |
of battery pack may create a risk of fire when used with |
another battery pack. |
b)Use power tools only with specifically designated |
battery packs. Use of any other battery packs may create |
a risk of injury and fire. |
c) When battery pack is not in use, keep it away from |
other metal objects, like paper clips, coins, keys, |
nails, screws or other small metal objects, that can |
make a connection from one terminal to another. |
Shorting the battery terminals together may cause burns |
or a fire. |
d)Under abusive conditions, liquid may be ejected from |
the battery; avoid contact. If contact accidentally |
occurs, flush with water. If liquid contacts eyes, |
additionally seek medical help. Liquid ejected from |
the battery may cause irritation or burns. |
6) Service |
a) Have your power tool serviced by a qualified repair |
person using only identical replacement parts. This |
will ensure that the safety of the power tool is maintained. |
SAFETY INSTRUCTIONS
Wear ear protectors. Exposure to noise can cause hearing loss.
Hold power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fasteners contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock.
Please read the instructions carefully before star- ting the machine.
Always wear hearing protection when using the machine.
Always wear goggles when using the machine.
Seal of Electrical Security
Always disconnect the plug from the socket before carrying out any work on the machine.
Accessory - Not included in standard equipment, available as an accessory.
Do not dispose of electric tools together with household waste material! In observance of European Directive 2002/96/EC on waste electri- cal and electronic equipment and its implementa- tion in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environ- mentally compatible recycling facility.
18
19
