SPECIFIC SAFETY RULES - SANDERS AND GRINDERS
1.Always use proper guard with grinding wheel. A guard protects operator from broken wheel fragments.
2.Accessories must be rated for at least the speed recommended on the tool warning label. Wheels and other accessories running over rated speed can fly apart and cause injury.
3.Make sure all wheel flanges and other mounting hardware are in good condition and are always used properly. Defective or missing parts may damage the wheels and other accessories. Always use mounting hardware supplied with the tool.
4.Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.
5.Keep hands away from all cutting edges and moving parts.
6.Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement.
7.WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
•lead from
•crystalline silica from bricks and cement and other masonry products, and
•arsenic and chromium from
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
Symbology |
| Specifications |
|
|
|
Double Insulated
Volts Alternating Current/ Direct Current
Amps
No Load Revolutions per Minute (RPM)
Underwriters Laboratories, Inc.
Canadian Standards Association
|
|
|
|
| Spindle |
|
|
Cat. | Volts | D.I.* or |
| No Load | Thread | Wheel | Min. Wheel |
No. | AC/DC | Grounded | Amps | RPM | Size | Size | RPM Rating |
Sanders |
|
|
|
|
|
|
|
120 | D.I. | 15 | 6000 | 7"/9" | 6500 | ||
120 | Grounded | 15 | 6000 | 7"/9" | 6500 | ||
120 | D.I. | 15 | 6000 | 7"/9" | 6500 | ||
Grinders |
|
|
|
|
|
|
|
120 | D.I. | 15 | 6000 | 9" | 6500 | ||
120 | D.I. | 15 | 6000 | 7" | 6500 | ||
120 | D.I. | 15 | 6000 | 9" | 6500 | ||
|
|
|
|
|
|
|
|
*Double Insulated
FUNCTIONAL DESCRIPTION
1.Rear handle
2.Trigger
3.
4.Handle release button (select models)
5.Side handle
6.Wheel guard (select models)
7.Grinding wheel (select models)
8.Guard adjustment lock lever (select models)
9.Spindle lock button
10.Side handle socket
5
8
6
7
1
2
3
4(on bottom)
9
10
page 3
