Minelab SD2100v2 instruction manual Accessories, Search Coils

Models: SD2100v2

1 33
Download 33 pages 36.55 Kb
Page 27
Image 27
12. Accessories

Instruction Manual

Page 17

12. Accessories

Figure 9 - Coil Search Patterns

12.1Search Coils

The SD2100v2 is supplied with the 11” Double ‘D’ as its standard coil. Three other coils are available as accessories for use on the SD2100v2

— the 18”, 11”, and 8” Monoloop coils.

CAUTION

DO NOT PLUG ANY SD SERIES COILS INTO ANY OTHER

DETECTOR!

This action can damage other detectors and such damage is not

covered by warranty

Monoloop coils tend to give slightly stronger or more sensitive signals than the Double ‘D’ coil. However, Monoloop coils are also a little more ‘noisy’ if the ground is heavily mineralised.

Larger diameter coils tend to give better ground coverage and deeper depth than smaller coils. However, a smaller coil tends to have increased sensitivity to tiny targets than larger coils.

There is, therefore, a definite advantage and purpose for each of the range of coil types and sizes.

Page 27
Image 27
Minelab SD2100v2 instruction manual Accessories, Search Coils, Do Not Plug Any Sd Series Coils Into Any Other Detector