6.2 UNIX Printing

6-17

TCP/IP Configuration Chapter 6

6.2.2 lpd Printing

lpd is an implementation of the standard UNIX line printer daemon
which lets you print across a TCP/IP network without the need to
install software on your workstation with all f iltering and banners done
by NIC. Remote printing uses the same commands (lpr, lpq, lpc) as
local printing.
The process begins when the lpr call f inds a printer on a remote system
by looking at the remote (rm) entry in the /etc/printcap file for that
printer. lpr handles a print job for a remote printer by opening a
connection with the lpd process on the remote system and sending the
data f ile (followed by the control file containing control information for
this job) to the remote system. The printer -based lpd then filters the
data and prints the job according to information contained in the
control file and its own printcap file.
NIC lpd recognizes the format of a certain printer emulations and
filters the data, if possible, so it can be printed on the printer type you
specify. You can indicate to the NIC lpd what type of printer is attached
to by either:
1. Accepting the default port setting (PCL, PostScript and other), or
2. Changing the listed emulations via the Telnet or the HTML pages
accessed by MAP or a Web Browser.
The following sections give specific lpd setup instructions for various
systems.

6.2.2.1 Setting Up a BSD Remote Printer to Use lpd

To set up a remote printer on the host that sends jobs to NIC using
printer resident lpd, add an entry to the /etc/printcap file on your
host for each printer you use. The steps are described below.
PageWorks.book Page 17 Tuesday, August 4, 1998 11:21 AM