Minolta 18, 18N, 25 6-25

6.2 UNIX Printing

6-25

TCP/IP Configuration Chapter 6

6.2.3.1 Loading the Software

The following procedures are only necessary when using the sup-

plied host-based lpr capability. Loading the software is not neces-

sary if printer-based lpr is used.

1. Log in as superuser (root) to the system that spools directly to

the print server.

2. Insert the CD-ROM in the host drive.

3. Go to or create the directory in which you want to install the

software. For example:

#mkdir /usr/MLT_install

Note

4. Use the tar command to load the software from the CD-ROM.

5. After performing the tar, the system will display a list of NIC

files copied by the tar. At this point, go to the specific section

for your system for instructions on running the installation

script.

6.2.3.2 Script Selection of Filters

There will be certain options in executing the script for various sys-

tems.

One of the questions posed by the install script is whether the printer

is a PostScript printer . If you answered no to this question, the install

script uses an input filter (inf ilter) that supplies CR/LF translation to

print ASCII files on a PCL printer. If you answered yes to this ques-

tion, your printcap file will reference psfilter which offers easy

ASCII-to-PostScript conversion. Normal PostScript format files are

not affected. Proprietary and public domain filters are available for

broader f iltering capabilities.

• If you already have a NIC at your site and you are now installing

another one, delete the files in the installation directory (not /usr/

nic). If these files remain, they can prevent the installation of a sub-

sequent print server.

PageWorks.book Page 25 Tuesday, August 4, 1998 11:21 AM

Contents

Main i Software License Agreement and Warranty ii iii Limited Software Warranty Limited Warranty Pur chase Remedies Minolta Network Card Warranty Warranty Term Warranty Covera ge Software License Agreement and Warranty (ii)For all other countries including Europe Software License Agreement Important: 1. SOFTWARE 2. LICENSE AGREEMENT 3. LICENSE v 4. RESTRICTIONS 5. LIMITED WARRANTY 6. LIMITATION OF REMEDIES vi 7. TERMINATION 8. GOVERNING LAW 9. GOVERNMENT END USERS vii 1) 10/100Base-T USER INSTRUCTIONS (For U.S.A.) FCC PART 15- RADIO FREQUENCY DEVICES WARNING viii ix x xi 2) 10BaseT/2 USER INSTRUCTIONS (For U.S.A.) FCC PART 15- RADIO FREQUENCY DEVICES WARNING xii xiii xiv xv Welcome Trademark Acknowledgements xvi CONTENTS Chapter 1: Introduction Chapter 2: Installing the Network Interface Card Chapter 3: Utilizing Windows Programs xvii Chapter 4: NetWare Configuration xviii Chapter 5: AppleTalk Configuration Chapter 6: TCP/IP Configuration xix xx Chapter 7: Operation and Troubleshooting xxi Appendix A: Jumper Settngs Appendix D: Index Appendix B: Specifications Appendix C: Using a Web Browser Page Page Page Introduction 1-1 1.1 Whats in the Package 1-2 1.1 Whats in the Package 1.2 Hardware/NOS Requirements 1-3 1.2 Hardware/NOS Requirements 1.2 Hardware/NOS Requirements 1-4 Page Page 2.1 Preparing the Printer 2-1 2.1 Preparing the Printer Note 2.2 Powering Up the Printer 2.3 Connecting to a Network the NIC 2-2 2.3 Connecting to a Network the NIC Page Page 3-1 3.1 Discov ery Program Management Access Program (MAP) 3-2 3.1 Discovery Program Management Access Program (MAP) 3.1.1 Installing the MAP 3.1 Discovery Program Management Access Program (MAP) 3-3 3.1.2 Configuring the MAP 3.1 Discov ery Program Management Access Program (MAP) 3-4 3.1.3 Using the MAP 3.1.4 IP Discovery Program 3.1 Discovery Program Management Access Program (MAP) 3-5 Page 3-7 3.2 IP Peer-to-Peer Printing Program 3.2.1 Installing the IP Peer-to-Peer Printing Program 3-8 3.2.2 Setting Up IP Peer-to-Peer Printing 3-9 3.2.3 Adding Printers for IP Peer-to-Peer Print- ing 3-10 3-11 3.3 IPX Peer-to-Peer Printing Program 3-12 3.3.1 Installing the IPX Peer-to-Peer Printing Program 3-13 3.3.2 Installing the Printer Driver and Setting the Printer Port 3.4 Using a Web Browser 3-14 3.4 Using a Web Browser Page Page 4-1 4.1 Configuring NetWare 2.15 and 3.x 4-2 4.1.1 Start PCONSOLE and Select File Server 4.1.2 Create Print Queues 4-3 4.1.3 Enter the Print Server Name 4-4 4.1.4 Configure the Print Server 4-5 4.1.5 Assign Print Queues to the Printer 4-6 4.1.6 Set Up Notify Options for the Printer (Optional) 4-7 4-8 4.1.7 Installing the Print Server on Multiple File Servers 4-9 4.1.8 Primary File Server 4.1.9 Preferred File Servers 4-10 4.2 Configuring NetWare 4.x Bindery Emulation 4.2.1 Confirm Bindery Context 4-11 4.2.2 Configure in Bindery Mode with PCONSOLE 4-12 4-13 4.3Configuring the NIC in Novell Directory Services 4-14 4.3.1Create Printer Object 4-15 4.3.2Create Print Server Object 4-16 4.3.3Create Print Queue Object 4-17 4.3.4Assign Printer Object 4-18 4-19 4.3.5Assign Print Server Object 4-20 4.3.6Check Assignments Page 4.4 NIC Configuration 4-22 4.4 NIC Configuration 4.4 NIC Configuration 4-23 4-24 4.5 Using the Novell PCONSOLE Utility 4.5.1 Changing the File Server 4-25 4.5.2 Changing Print Queues 4.5.3 How to Set Up Notify 4-26 Page Page 5.1 Choosing the Printer 5-1 5.1 Choosing the Printer 5.2 Loading the AppleTalk NIManage Utility Program 5-2 5.2 Loading the AppleTalk NIManage Utility Program 5.2 Loading the AppleTalk NIManage Utility Program 5-3 5.3 Configuring the NIC 5-4 5.3 Configuring the NIC 5.3.1 Configuration 5.3.2 Error Log 5.3 Configuring the NIC 5-5 5.3.3 Protocol Setup 5.3.4 Options Page Page Page 6-1 6.1 Installation in a Windo ws Envir onment 6-2 Windows for Workgroups Windows 95 6-3 Windows NT 6-4 6.1.1 Setting up the NIC 6.1.2 Assigning IP Address with arp & ping 6-5 6.1.3 Assigning the IP Address with BOOTP 6-6 6-7 6.1.4 Setting Up IP and lpr Parameters 6.1.5 Creating an lpr Queue on the Workstation 6-8 Windows 95 Windows NT3.51 6-9 Windows NT4.0 6-10 6.2 UNIX Printing 6-11 6-12 6.2.1 Configuring the IP Address on the NIC 6.2.1.1 Using BOOTP 6-13 6-14 6.2.1.2 Using rarp 6-15 6.2.1.3 Using arp & ping 6-16 6-17 6.2.2 lpd Printing 6.2.2.1 Setting Up a BSD Remote Printer to Use lpd 6-18 6.2.2.2 Setting Up an AIX 2.5 Remote Printer to Use lpd 6-19 6.2.2.3 Setting Up an AIX 4.0 System 6-20 6.2.2.4 Setting Up an HP/UX Remote Printer to Use lpd 6-21 6.2.2.5 Setting Up an AS/400 Systems to Use lpd 6.2.2.6 Setting Up a DEC ULTRIX 4.3 RISC or OSF1/ ALPHA Remote Printer 6-22 6.2.2.7 Setting Up a SCO UNIX Remote Printers to Use lpd 6-23 6.2.2.8 Setting Up System V Rel.4 and Solaris 2.X to Use lpd 6-24 6.2.3 Installing TCP/IP for NIC If Not Running lpd 6-25 6.2.3.1 Loading the Software 6.2.3.2 Script Selection of Filters 6-26 6.2.3.3 Manual Selection of Filters 6.2.3.4 Installing and Printing on Solaris 1.X and OSF1/ALPHA Systems 6-27 6-28 6.2.3.5 Installing & Printing on an DEC ULTRIX 4.3 RISC System 6-29 6.2.3.6 Installing and Printing on the HP/UX System 6-30 6-31 6.2.3.7 Installing and Printing on a System V (Solaris 2.X)/System V Rel.4 386-based Machine 6-32 6-33 6.2.3.8 Installing & Printing on a SCO UNIX System 6-34 6-35 6.2.3.9 Installing and Printing on an AIX RISC System/6000 6-36 6-37 6-38 6-39 6.3 Running Telnet 6.3.1 Making Connection and Main Menu 6-40 6.3.2 Configure IP Parameters 6-41 6.3.3 Select Printer Languages 6-42 6-43 6.3.4 Enable/Disable Network Protocols 6.3.5 Reset Unit 6.3.6 Restore Factory Defaults 6.3.7 Change Password 6-44 6.3.8 Exit Telnet 6.4 FTP Printing 6-45 6.4 FTP Printing 6.5 Dynamic Host Configuration Protocol 6-46 6.5 Dynamic Host Configuration Pr otocol Important! Page Page 7.1 LED Status Indicator 7-1 7.1 LED Status Indicator 7.1 LED Status Indicator 7-2 7.2 Status/Configuration Report 7-3 7.2 Status/Configuration Report 7.2 Status/Configuration Report 7-4 7.3 Resetting the NIC to Factory Default 7-5 7.3 Resetting the NIC to Factory Default 7.4 How to Diagnose Problems 7-6 7.4 How to Diagnose Problems Page 7-8 7.5 Troubleshooting Checklists 7.5.1 Troubleshooting Network Hardware Con- nections 7.5.2 Troubleshooting NetWare Protocol 7.5.2.1 NetWare Checklist 7-9 7.5.2.2 File Server Checklist 7.5.2.3 Workstation Chec klist 7-10 7.5.2.4 NIC Configuration Checklist 7.5.2.5 Printer Server/File Server/Printer Checklist 7-11 7.5.2.6 Workstation to NIC Connection Checklist 7.5.2.7 NIC Loses Its File Server Connection 7.5.2.8 Unable to Print from a Different Context 7-12 7.5.3 Troubleshooting AppleTalk Protocol Page Page Jumper Settings A-1 A.1 Network Interface Cards and Jumper Locations PageWorks.book Page 2 Tuesday, August 4, 1998 11:21 AM Jumper Settings Appendix A 10BaseT/2 A.1 Netw ork Interface Cards and Jumper Locations The illustration belo w sho ws the location of each of the jumpers on the Ethernet NIC. 10/100BaseT A.2 Ethernet Jumpers A-3 A.2 Ethernet Jumpers A.3 Reset to Factory A.4 BUS Handshake A-4 A.4 BUS Handshake A.5 Network Bridging Page Page B.1 Network Interface Card B-1 B.1 Network Interface Card The following tables provide general specifications for the NIC. B.2 10/100BaseT/UTP Cables Page Page Page C.1 Accessing the HTTP Server Screens C-1 C.1 Accessing the HTTP Server Screens C-2 C.1.1 Minolta PageScopeutility C-3 C.1.2 Network Administration page C-4 C-5 C-6 C.2 Supported Web Browsers Page Page D-1 A B C D E F H I D-2 J L N M D-3 O P R S T D-4 U Z V W