UNINET IMAGING INC. • MINOLTA® MAGICOLOR 5430 CARTRIDGE REMANUFACTURING INSTRUCTIONS
SEPARATING THE CARTRIDGE
1. Locate the cartridge end cap of the cartridge.
Using a phillips screwdriver, remove the seven highlighted screws that hold the cartridge together.
2.Cartridge separated. Set the drum unit and end cap aside. We will now proceed to clean the toner hopper.
CLEANING THE TONER HOPPER | 4. Using a small flathead screwdriver, carefully remove the fill |
3. Locate the toner hopper fill plug. | plug by prying it off. |
| Empty any residual toner from the hopper and clean thoroughly |
| using compressed air. |
| Once clean, refill, apply plug, and set aside. |
w w w. unineti m a g i n g . c o m / t e c h n i c a l . a s p
11124 Washington Blvd., Culver City, California USA 90232 • Ph +1 310 280 9620 • Fx +1 310 280 0533 • techsupport2@uninetimaging.com
© 2007 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not guarantee or warrant downloaded information.
