- 8 -
SYSTEM REQUIREMENTS (Windows®)The system requirements for the operation of this software are as shown below:
IBM PC/AT and their compatible computers
CPU Intel Pentium®Processor 133MHz or higher
OS
Windows®2000 Professional, Windows®Me,
Windows®98 / 98 Second Edition, Windoes®95,
Windows®NT4.0 (Service Pack 6 or later)
RAM A minimum of 64MB of RAM
Hard Disk Space 100MB or more of free hard disk space for use as workspace
after the software installation
Monitor
Resolution:VGA (640 X 480 dots) or higher
XGA (1024 X 768 dots) or hjgher is recommrnded
Color Depth:True Color (24 bit) or higher
CD-ROM Drive Required for software installation
Interface USB port* that each PC maker guarantees to operate without problem
* You need a USB port when you connect a USB mass storage class supported digital camera
such as DiMAGE 7 or DiMAGE 5 to your PC with a USB cable and use (a CF card in) the digital camera as
a removable disc with this software.If you use Windows®98/98 Second Edition, you must install the USB
driver software in the attached CD-ROM to execute this operation.(See the digital camera’s instruction
manual for details.) If you use Windows®95/NT 4.0, you can not execute the above operation (because USB
pots are not normally supported), however, you can still operate image files copied on PC hard disks since
the software also runs on Windows®95/NT 4.0.