How
to
Attach Drain
Pan
(Some
Models)
The air conditioner employs a proper drain method whereby the condensed water (moisture removed from the air) is drained to the outside.
In very humid weather, (and for reverse cycle models in the reverse mode) excessive condensate water removed from the air may cause some water to collect. To remove this excess water you can install the drain pan as
detailed below. | CABINET |
|
1.Take the drain pan which is located in the air discharge.
2.Remove the hole rubber from the
3.Install the drain pan to the right corner of the cabinet with 4 (or 2) screws.
4.Connect the drain hose to the outlet located at the bottom of the drain pan.You can purchase the drain hose or tubing locally to satisfy your particular needs. (Drain hose is not supplied).
DRAIN 
PAN
SCREW 
DRAIN HOSE 
How
to
Connect
a Drain
Hose
A drain hole is provided at the rear of the air conditioner unit.
Select a drain method according to the following.
1.Remove the hole rubber from the
2.Connect a drain hose to the drain pipe as shown in Fig. 1.
3.Or connect a pipe elbow to the drain pipe, then connect a drain hose to the pipe elbow as shown in Fig. 2.
Fig. 1
DRAIN PIPE
DRAIN HOSE
Fig. 2
DRAIN PIPE
DRAIN ELBOW
DRAIN HOSE
Operating Instructions
Adjusting the Air Flow Direction
TURN THE AIR CONDITIONER OFF AND REMOVE THE PLUG FROM THE POWER OUTLET.
Outdoor
Coils
The coils on the outdoor side of the air conditioner should be checked regularly. If they are clogged with dirt or soot they may be professionally steam cleaned, a service available through a dealer.
12
