Controls
The controls will look like one of the following.
NOTICE | : Optional |
FAN 
FAN
ThermostatOperation
Heater
Warmer Cooler
Thermostat | Operation |
■AUTO SWING (Optional)
ON ( 
) : Air swing is operated while OPERATION knob is set to the COOL or HEAT position.
OFF( ) : Stops the operation of air swing.
■THERMOSTAT
Turn the thermostat control to the desired setting. The control position is a normal setting for average conditions. You can change this setting, if necessary, in accordance with your temperature preference.
The thermostat automatically controls cooling or heating, but the fan runs continuously whenever the air conditioner is in operation. If the room is too warm, turn the thermostat
control clockwise. If the room is too cool, turn the thermostat control counterclockwise.
■HEATER ( 
) LAMP
When the unit sets heating operation condition, the green lamp is lighted.
When the frost settles on the heat exchanger of the outside, defrosting is made automatically and the green lamp is turned off.
The unit may give a "hiss" and the fan motor stops for 1 to 10 minutes.
This should not be regarded as a problem.
After defrosting, the heating operation begins again.
■OPERATION
OFF | ( | o ) : Turns the air conditioner off. |
LOW FAN | ( | ) : Permits the low fan speed |
|
| operation without cooling |
|
| (heating). |
LOW COOL | ( | ) : Permits cooling with the low fan |
|
| speed operation. |
HIGH COOL ( | ) : Permits cooling with the high | |
|
| fan speed operation. |
LOW HEAT | ( | ) : Permits heating with the low |
|
| fan speed operation. |
HIGH HEAT | ( | ) : Permits heating with the high |
|
| fan speed operation. |
CAUTION : When the air conditioner has been performed its cooling operation and is turned off or set to the fan position, wait at least 3 minutes before resetting to the cooling operation again.
ENGLISH
9
