English
Symptom | Possible Cause | What To Do |
|
|
|
The Charger Active | 1. The input power cord is | 1. Plug the input power cord |
LED is not on. | not plugged into the AC wall | into the AC wall outlet. |
| outlet. | 2. Once commercial power is |
|
| |
| 2. No commercial power | available recheck the LED. |
| available. | 3. Check the circuit breaker |
|
| |
| 3. No AC voltage at the AC | at the service panel to see if |
| wall outlet. | it is tripped. |
| 4. Internal charger fault. | 4. Call for Service. |
|
|
|
The DC Breaker On | 1. The DC circuit breaker | 1. Turn the DC circuit breaker |
LED is not on. | is in the Off position. | to the On position. |
| 2. The DC circuit breaker | 2. Reset the DC circuit |
| is tripped. | breaker. |
| 3. The internal battery wires | 3. Reconnect the internal bat- |
| are disconnected. | tery wires. |
| 4. Internal fault. | 4. Call for Service. |
|
|
|
The charger is not | 1. The input power cord is | 1. Plug the input power cord |
providing the correct | not plugged into the AC wall | into the AC wall outlet. |
charge voltage. | outlet. | 2. Set the dipswitch to the |
|
| |
| 2. The dipswitch is not set | correct setting. |
| to the correct input voltage. | 3. Call for Service. |
| 3. The charger has an in- |
|
| ternal fault. |
|
|
|
|
15
