Receiving Inspection
After removing your Minuteman UPS from its carton, it should be inspected for damage that
may have occurred in shipping. Immediately notify the carrier and place of purchase if any
damage is found. Warranty claims for damage caused by the carrier will not be honored.
The packing materials that your UPS were shipped in are carefully designed to minimize any
shipping damage. In the unlikely case that the UPS needs to be returned to Minuteman,
please use the original packing material. Since Minuteman is not responsible for shipping
damage incurred when the system is returned, the original packing material is inexpensive
insurance.
PLEASE SAVE THE PACKING MATERIALS!
WARNING! RISK OF ELECTRICAL SHOCK. HAZARDOUS LIVE PARTS IN-
SIDE THIS POWER SUPPLY ARE ENERGIZED FROM THE BATTERY EVEN WHEN
THE AC INPUT POWER IS DISCONNECTED.
TO DE-ENERGIZE THE OUTPUTS OF THE UPS:
1. IF THE UPS IS ON, PRESS THE ON/OFF BUTTON.
2. DISCONNECT THE UPS FROM THE AC POWER OUTLET.
3. TO DE-ENERGIZE THE UPS COMPLETELY, DISCONNECT THE BATTERY.
CAUTION! TO REDUCE THE RISK OF ELECTRICAL SHOCK IN CONDITIONS
WHERE LOAD EQUIPMENT GROUNDING CANNOT BE VERIFIED, DISCONNECT
THE UPS FROM THE AC POWER OUTLET BEFORE INSTALLING A COMPUTER
INTERFACE CABLE. RECONNECT THE POWER CORD ONLY AFTER ALL
SIGNALING CONNECTIONS ARE MADE.
CAUTION! CONNECT THE UPS TO A TWO POLE, THREE WIRE GROUNDING
AC POWER OUTLET. THE RECEPTACLE MUST BE CONNECTED TO APPROPRI-
ATE BRANCH PROTECTION (CIRCUIT BREAKER OR FUSE). CONNECTION TO
ANY OTHER TYPE OF RECEPTACLE MAY RESULT IN A SHOCK HAZARD AND
VIOLATE LOCAL ELECTRICAL CODES.
NOTE: FOR HARDWIRE I/O CONFIGURATIONS FOR THE MCP 2000(i) AND THE MCP 3000(i),
UNITS ARE CONSIDERED FIXED. AN INSULATED GROUNDING CONDUCTOR SHOULD BE
IDENTICAL IN SIZE, THICKNESS, AND INSULATION MATERIAL TO THE GROUNDED AND
UNGROUNDED BRANCH-CIRCUIT SUPPLY CONDUCTORS. THE WIRE, WHICH SHOULD BE
GREEN OR GREEN WITH ONE OR MORE YELLOW STRIPES, IS TO BE INSTALLED AS PART
OF THE BRANCH CIRCUIT THAT SUPPLIES THE UNIT. THE GROUNDING CONDUCTOR DE-
SCRIBED IN THE ABOVE ITEM SHALL BE GROUNDED TO THE EARTH END OF THE PRO-
TECTED EQUIPMENT.
NOTE: OVERCURRENT PROTECTION IS TO BE PROVIDED BY OTHERS.
NOTE: THE SOUND PRESSURE LEVEL AT THE OPERATORS POSITION ACCORDING TO
IEC 704-1:1982 IS EQUAL TO OR LESS THAN 70dB(A).
4