Minuteman UPS UPS user manual Battery Replacement Procedure

CAUTION: Replace batteries with the same number and type as originally installed in the UPS. These batteries have pressure operated vents. These UPSs contain sealed non-spillable lead acid batteries.

SmartSine	S 700	S 1000	S 1400	S 2000
Model #
Battery	2-12V7Ah	2-12V12Ah	2-12V17Ah	2-12V17Ah
Model #
B.B. Part #	BP7-12	BP12-12	BP12-17	BP12-17
CSB Part #	GP1272 F2	GP12120 F2	GP12170 B1	GP12170 B1
Yuasa Part #	NP 7-12	NP 12-12	NP 17-12	NP 17-12

English

BATTERY REPLACEMENT PROCEDURE

PLEASE READ THE CAUTIONS BEFORE ATTEMPTING TO REPLACE THE BATTERIES

Hot-swappable batteries mean that the batteries can be replaced without powering down the whole UPS system.

NOTE: If there is a power interruption while replacing the hot-swappable batteries, with the UPS on, the load will not be backed up. To hot-swap the batteries start with step number 5.

1.Turn off the equipment that is plugged into the output receptacles of the UPS.

2.Press and release the ON/OFF button on the front panel to turn the UPS OFF.

3.Unplug the UPS's AC power cord from the AC outlet.

4.Unplug the equipment from the output receptacles of the UPS.

5.Remove the front panel of the UPS.

6.Lay the front panel on top of the UPS.

7.Remove the two retaining screws and the battery retaining bracket.

13