Customized Output Receptacle Panels

English

The SmartSine UPS has a removable receptacle panel. The receptacle panel can be configured with one locking receptacle and two duplex receptacles. This will allow the user to customize the output receptacles for their specific applications. MINUTEMAN will only use UL or CE approved receptacles. Here is one example that could be used: one L5-20R, two 5-15/20R duplexes. To customize your MINUTEMAN UPS for your specific application, contact your local distributor or contact MINUTEMAN at 1-972-446-7363, 1-800-238-7272 or fax 1-972-446-9011to find out which output receptacle options are available. Come visit our web site at www.minutemanups.com to find out about all the Power Protection products available from MINUTEMAN.

MINUTEMAN reserves the right to make changes without notice.

Page 19

Image 19

Minuteman UPS UPS user manual Customized Output Receptacle Panels

Contents

Page English Important Safety Instructions Materials Authorized Service Personnel only Front Panel SWF Front Panel Indicators Rear Panel Installation Placement Connecting Your Equipment Installation Communications Port Connection Optional Connecting the UPS to AN AC SourceChecking the Site Wiring Fault Charging the Battery Turning the Unit ON/OFF DIP Switch SettingsSelf Test LOW Battery Warning Alarms On BatteryUPS Fault Replace Battery Symptom Possible Cause What To Do Authorized Service Personnel only Replacing the Battery Battery Replacement Procedure English If the UPS Requires Service Model Number EPO Customized Output Receptacle Panels Limited Product Warranty Limited Product Warranty Declaration of Conformity 224 PN 34000196 Rev