Mirage Loudspeakers OM DESIGN SERIES om design series manual, getting started

om design series manual

2.0 getting started

2.Remove the protective cover from the top of the box, and tip the box on its side, so that the side marked with “open here” is pointing upwards.

3.Remove the manual and the accessory kit which will be visible upon opening the carton. Unpack the protective gloves contained within the accessory kit and use them for any of the following unpacking and installation steps.

4.Remove the foam packing by gently lifting the packing straight up and out of the interior cardboard box. You will now see the OMD-28 wrapped in protective material, positioned on a bottom layer of foam packaging.

5.Remove the top grille from the foam packaging before removing the cabinet!

6.Lift the OMD-28 out of the shipping box by grasping the base of the loudspeaker’s sides and carefully stand the loudspeaker onto its high gloss base. Do not use the binding posts to lift the loudspeaker.

NOTE: THE OMD-28 WEIGHS APPROXIMATELY 75

POUNDS. PLEASE USE CAUTION WHEN LIFTING THE

SPEAKER FROM IT’S PACKAGING.

4