owners manual
Bookshelf/Entertainment Unit Placement
The small size and Omnipolar dispersion of the versatile OMNISAT permits them to be easily placed, among other places, in a bookshelf. If this is your preferred placement, affix the isolating pads provided to the bottom of the speaker to help isolate the speaker from the shelf and eliminate any transference of resonance. To maximize the Omnipolar dispersion potential, bring the speaker as close to the front of the cabinet as possible. See Diagram 9.
CONNECTIONS
The Mirage OMNISAT is equipped with high quality binding posts that permit the use of banana plugs, spades, or a bare wire connection. Turn them counterclockwise to loosen, clockwise to tighten.
Connect the speaker wire from the positive (RED +) terminal on the amp to the positive (RED+) terminal on the speaker. Connect the negative
See Diagram 7.
OMNISAT
System Type: | Magnetically Shielded |
| Omnipolar Satellite |
Frequency |
|
Response: | 70 |
Tweeter: | 1” (25mm) PTH™ |
| Pure Titanium Hybrid |
Woofer: | 4.5” Polypropylene Titanium |
| Deposit Hybrid cones with |
| butyl surrounds |
Power Handling: | 150 watts |
Crossover Points: | 2.2 kHz |
Room Efficiency: | 89 dB |
Impedance: | |
| 4 ohm minimum |
Recommended |
|
Amplifier Power: | 10 to |
| RMS/Channel |
Inputs: | High Quality |
| Binding Posts |
Weight: | 7 lbs |
| 3.2 kg |
Dimensions: | inches: 8 x |
(HxWxD) | cm: 20.3 x 15.8 x 20.3 |
LF-150
System Type: | Magnetically Shielded, |
| Front Ported Subwoofer |
Amplifier Type: | Discrete MOSFET Class A/B |
Power Output: | 600 watt dynamic peak, |
| 150 watts continuous |
Woofer: | 10” Polypropylene Titanium |
| Deposit Hybrid |
Magnet Size: | 28 oz. |
Voice Coil |
|
Diameter: | 1.5” |
Frequency |
|
Response: | |
Phase Switch: | 0/180 |
Variable |
|
Low Pass Filter: | 40Hz |
Inputs: | Low level input, crossover |
| bypass, high level |
Outputs: | High level |
Dimensions: | inches: |
| cm.: 31.5 x 50 x 39.4 |
Weight: | 45 lbs. |
| 20.4 kg |
6
