Miro Displays miro TD490 manual Power Management, Plug & Play, C1 6500K, C2 7800K

MENU DESCRIPTIONS

LANGUAGE

To choose language used in the menus and control screens.

SCALING MODE

To adjust the input signal to the screen size by using the following options:

-Fill All: To adjust the signal to the full screen.

-Fill Aspect Ratio: To adjust the horizontal signal to full screen but maintain the original vertical signal.

This function only works when the resolution setting is lower than the native resolution of 1280 x 1024.

C1 (6500°K) C1

Default color Temperature setting: Adjust the color temperature to 6500°K x = 0.313, y = 0.329

C2 (7800°K) C2

Default color Temperature setting: Adjust the color temperature to 7800°K x = 0.296, y = 0.311

RED

Individual adjustments for red. Adjusts the intensity of red.

GREEN

Individual adjustments for green. Adjusts the intensity of green.

BLUE

Individual adjustments for blue. Adjusts the intensity of blue.

RESET

To set all the adjustments to factory default values.

EXIT

To save user adjustments and exit OSD menu.

POWER MANAGEMENT

The power management feature of this monitor is comprised of two stages: On or Out Of Range (Green), OFF (Amber).

Power Mode	H-Sync	V-Sync	Video	LED Color
Normal	Pulse	Pulse	Active	Green
Out Of Range	Pulse	Pulse	Active	Green
Off	Pulse	No pulse	Blanked	Amber.
Off	No pulse	Pulse	Blanked	Amber
Off	No pulse	No pulse	Blanked	Amber

This monitor meets the Green Monitor standards as set by the Video Electronics Standards Association (VESA). This feature is designed to conserve electrical energy by reducing power consumption when there is no video input signal present. When there is no video input signal this monitor, following a time-out period, will automatically switch to an OFF mode. This reduces the monitor's internal power supply consumption. After the video input signal is restored, full power is restored and the display is automatically redrawn. The appearance is similar to a "Screen Saver" feature except the display is completely off. The display is restored by pressing a key on the keyboard, or clicking the mouse.

PLUG & PLAY

This monitor is equipped with VESA DDC1/2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The communication channel is defined in two levels, DDC1 and DDC2B. The DDC1 is a unidirectional data channel from the display to the host that continuously transmits EDID information. The DDC2B is a bidirectional data channel based on the I²C protocol. The host can request EDID information over the DDC2B channel.

NOTE:

THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPE- RATE PROPERLY, THERE MUST BE A VIDEO INPUT SIGNAL.

10 11