Mitel 4125 SX-200 manual Headset Operation Headset with Feature Control Switch, To answer a call

Headset Operation (Headset with Feature Control Switch)

IMPORTANT NOTE: Mitel Networks Headsets with Feature Control Switch (PN9132-800-500-NA/9132-800-501-NA) must be installed in the dedicated headset jack (the jack nearest the front of the phone). Installation will disable your handset microphone. Disconnecting the headset at the jack or at the quick-disconnect plug restores handset operation. If handset operation is required for an extended period of time, you should press the Headset feature key to return the telephone to handset mode.

To answer a call:

zPress the flashing Line Appearance key -OR-

Quickly press and release the headset's feature control switch. -OR-

Lift the handset(see Note 1).

To mute the headset microphone:

zPress and hold the headset's feature control switch.

To hang up:

zPress CANCEL. -OR-

Quickly press and release the headset's feature control switch.

-32-