ABOUT YOUR PHONE

The Mitel Networks 5010 IP has eight fixed-function keys ( SUPERKEY, MESSAGE, HOLD, CANCEL, TRANSFER/CONFERENCE, REDIAL,, ) and seven personal keys with built-in status indicators. The personal key on the bottom left is always your Prime Line; the remaining personal keys can be programmed as:

zFeature keys (for example, Swap). You can program feature keys using the Desktop Tool. Your administrator can also program feature keys.

zSpeed Call keys. You can program speed call keys from your phone, or using the Desktop Tool.

zLine Appearances. Only the administrator can program line appearances.

Note: For more information on the Desktop Tool, talk to your system administrator.

Your telephone also features display-assisted selection of features, on-hook dialing, and a large Message Indicator.

Note: When using the SuperKey, press Cancel to back up one menu level.

IMPORTANT NOTE FOR HEADSET USERS:

Mitel Networks Headsets with Feature Control Switch (PN9132-800-500- NA/9132-800-501-NA) must be installed in the dedicated headset jack (the jack nearest the front of the set). Installation will disable your handset microphone. Disconnecting the headset at the jack or at the quick- disconnect plug restores handset operation.

Telephone status indicators

When line is

the indicator is

Idle

Off

Busy

On

Ringing

Flashing slowly

On hold at your set

Flashing rapidly

On hold at another set

Flashing slow on/fast off

-1-

Page 5
Image 5
Mitel 5010 manual About Your Phone, Telephone status indicators