Protect your hearing, Adjust the viewing angle | Mitel 5224, 5212

Protect your hearing

Your phone has a control for adjusting the volume of the handset receiver or headset. Because continuous exposure to loud sounds can contribute to hearing loss, keep the volume at a moderate level.

IMPORTANT NOTE FOR HEADSET USERS: Mitel Headsets with Feature Control Switch must be installed in the dedicated headset jack (the jack on the back of the phone). Installation will disable your handset microphone. Disconnecting the headset at the jack or at the quick-disconnect plug restores handset operation.

Adjust the viewing angle

The stand built into your phone tilts to give you a better view of the keys.

To tilt your telephone for better viewing:

1.Turn the phone so that the front faces away from you.

2.Hold the base unit firmly and press the release tabs on the sides of the stand to detach the base unit.

3.Hinge the hooks of the base unit into the notches on the back of the phone and snap into place as follows:

a.For a high–angle mount, hinge the two lower hooks into the bottom set of notches and snap the two upper hooks into the middle set of notches.

b.For a low–angle mount, hinge the two lower hooks into the middle set of notches and snap the two upper hooks into the top set of notches.

-9-

Image 14

Mitel 5224, 5212 manual Protect your hearing, Adjust the viewing angle, To tilt your telephone for better viewing

Contents

User Guide PN 58009805, Rev a 3300 ICP Contents Making and Answering Calls Feature Access Codes About Your Phone 5212 IP Phone 5224 IP Phone Feature Function Elements of Your Phone FeatureFunction Important Note for Headset Users About Feature Access Codes Selecting Menu Options Dont cradle the handset Tips for Your Comfort and SafetyFor Users on Resilient 3300 ICP Systems To tilt your telephone for better viewing Adjust the viewing angleProtect your hearing To adjust the Ringer Pitch while the set is idle Handset Receiver Volume ControlTo adjust the Ringer Volume while the set is ringing Customizing Your 5212/5224 IP Phone Display Contrast Control Speaker Volume ControlTo adjust the Display Contrast while your set is idle To program a personal key Feature KeysTo display information about a key Make a call Making and Answering CallsLanguage Change Answer a call To make an Emergency Call Redial Saved Number Phonebook 5224 IP Phone onlyRedial To store a Speed Call number Speed Call KeysTo dial a stored Speed Call number To store a personal Speed Call number Speed Call Personal must be setup by TelcomTo dial a stored personal Speed Call number Handsfree Operation To answer a call when you hear ringback To enable or disable Auto-AnswerTo enable or disable Auto-Answer on a 5224 IP Phone only Auto-Answer Mute Call HandlingHold Conference Split TransferConference To move a call on hold to another line appearance Add Held 5224 IP Phone onlySwap To alternate between the two parties Call Forward To program Call Forward To turn Call Forward on and off once it has been programmed Call Forward Remote Im Here To force an incoming call to be forwarded Call Forward End ChainingCall Forward Forced 5224 IP Phone only To turn Messaging Advisory off Messaging AdvisoryTo turn Messaging Advisory on Messaging Callback To cancel a Callback Cancel Callback Set By Callback SoftkeyCancel All Callbacks Set By Callback Softkey To cancel all Callbacks Call Park Using Advanced FeaturesAccount Codes Do Not Disturb Call PickupCampon Direct Paging To page a party To turn Handsfree Answerback off Direct Paging Handsfree Answerback EnabledTo turn Handsfree Answerback on To answer a call using Handsfree Answerback To end a Handsfree Answerback call Direct Paging Handsfree Answerback Disabled Arrives Burst of tone Reminder 5224 IP Phone only To view, change, and/or cancel a pending ReminderTo acknowledge a Reminder when your phone rings once To end a Direct Page call, do one of the following Headset Operation To enable Headset OperationTo answer a call when Auto Answer is disabled To hang up To disable Headset Operation Headset Operation with Feature Control SwitchTo enable or disable Headset Operation To answer a call Music To make a Group Group Paging / Meet Me Answer must be set up by TelcomTo respond to a Group Page by using Meet Me Answer Hot Desking must be set up by Telcom To remotely log out a Hot Desking phone Tag Call To tag a malicious call Call History To display the call history, and view call detail To delete a particular call from the call log To return a callTo delete all missed, answered, or outgoing call logs Release To release from an attempted transfer or conference call Feature Access Codes