Pairing a Bluetooth headset | Mitel IP8830 instruction

IP8830 Broadworks IP Phone

User Guide

5.10.1. Pairing a Bluetooth headset

A Bluetooth headset must be paired with the IP8830 Bluetooth module before it can be connected (activated). Up to five (5) headsets may be paired with the IP Phone at one time. Note that only one may be active at a time.

To pair and connect a new headset with the IP Phone:

oPress the Settings () button.

oDial 3, or move the cursor to 3.Phone Settings using the Previous-Next softkeys, and press the

OK softkey.

oDial 11, or move the cursor to 11.Bluetooth using the Previous-Next softkeys, and press the OK softkey.

oDial 1, or move the cursor to 1.Headset Management

using the

softkeys, and press the

08:30

Paired Headset List

softkey. This will display a list of paired headsets.

*Wireless Headset (00:1A:34:56:78:AB)

Add

Delete

oIf no headsets are paired with the IP Phone, press the Search softkey, the IP Phone will search for nearby

Bluetooth headsets. If one or more Bluetooth headsets are already paired with the IP Phone, press the right navigation button and select the Add softkey to add another headset.

oSelect a Bluetooth headset from the list of headsets using the Next softkey, and select the Pair softkey.

08:30 No Paired Headset

08:30 Searched Headset List

Wireless Headset(00:1A:34:5678:AB)

Search Next Pair

o When the “Enter PIN Code” message displays,		input the			08:30
o When the “Enter PIN Code” message displays,		input the
PIN associated with the headset and press	OK	softkey. If a

			Enter PIN Code
			Enter PIN Code
valid PIN is entered, the headset is automatically activated			Å	Clear	OK
for use with your IP8830 phone.			Å
for use with your IP8830 phone.

oMove to another parameter with the navigation buttons and continue the session or press the Settings () button to exit the configuration session.

5.10.2. Connect or Disconnect a Paired Headset

When one or more headsets are paired with the IP8830 phone, the headset must be connected (activated) prior to use. When it is desired to change the active headset, the presently active headset must be disconnected (deactivated) prior to connecting the new headset. The following procedure describes the steps required to connect or disconnect a headset that is already paired to the IP Phone.

To connect a paired headset or disconnect an active headset: