Mitel IP8830 manual Setting Flexible Buttons, Feature Description

IP8830 Broadworks IP Phone User Guide

oPress the Yes softkey to enable the Headset Auto Mode or press the No softkey to disable the Headset Auto Mode.

oMove to another parameter with the navigation buttons and continue the session or press the Setting () button to exit the configuration session.

08:30 Headset Auto Mode

Current value is ‘No’.

YesNo

5.5. Setting Flexible Buttons

Your IP8830 Phone has twenty-four (24) flexible buttons. Normally, the first two (2) buttons are for your line. The flexible buttons not assigned as line buttons can access various functions. The table below indicates the available functions with a brief description of each.

	Feature	Description
0	No Function	Unassigned
1	Speed Dial Function	Dials the assigned number
2	Phone Book Function	Views the personal phone book
3	Call Log Function	Views the call log list
4	Mute Function	Toggles the Mute feature on and off
5	Headset Function	Toggles the Headset on and off
6	Redial Function	Dials the last number dialed by the user.
7	Return Call Function	Dials the number of the last answered call
8	Set Call Forwarding	Sets the call forwarding configuration
9	Conference Function	1. Initiates a conference call
		2. Joins calls in a conference
10	Transfer Function	Initiates a call transfer
11	Hold Function	Places an active call on hold
12	Do not disturb	Toggles the DND on and off
13	Set Ringer Off	Toggles the ringer on and off
14	Message Function	Views the number of new and old messages stored
		in the Voice Mail server, and dials the Voice Mail
		server by pressing the	Dial	softkey

To assign a function to a flexible button not used as a line:

oPress the Setting () button.

oDial 3, or move the cursor to 3.Phone Settings using the Previous-Next softkeys and press the OK softkey.

o Dial 5, or move the cursor to 5.Flexible Key Setting using

08:30

Press Flexible Button

the

Previous

-

Next

softkeys and press the

OK

softkey.

o Select the desired flexible button. An asterisk, », displays

in front of the current setting.

08:30

o Select a function using the

-

softkey and

Previous

Next

[05] Select Function

press the

OK

softkey. Refer to the flexible button functions

*No Function

chart above.

Previous

Next

OK

16 Dec. ‘08