Mitel IP8830 manual Enabling Speed Number Dialing, Key Tone, Bluetooth Headset

IP8830 Broadworks IP Phone

User Guide

5.8. Enabling Speed Number Dialing

The IP8830 Phone includes a Phone Book that supports up to 100 entries. Each Phone Book record includes a two-digit Speed number, see Speed Number Dialing. When enabled, dialing the Speed number (00~99) sends the contact number or user id from the associated Phone Book record.

To enable/disable Speed number operation:

oPress the Setting () button.

oDial 3, or move the cursor to 3.Phone Settings using the Previous-Next softkeys and press the

OK softkey.

oDial 9, or move cursor to 9.Speed Number using the Previous-Next softkeys and press the OK

softkey.

o	Press the			Yes	softkey to enable Speed number, or press				08:30
	the	No	softkey to disable Speed number.
							Speed Number
o	Move to another parameter with the navigation buttons and						Current value is ‘Yes’
								Yes	No
	continue the session or press the Setting (					) button to

exit the configuration session.

5.9. Key Tone

When you press a button on the IP8820 phone, the phone will generate a beep tone to indicate that the button has been pressed. This key tone is optional and can be enabled or disabled using the key tone setting.

To enable/disable the Key Tone:

oPress the Settings () button. .

oDial 3, or move the cursor to 3.Phone Settings using the Previous-Next softkeys and press the

OK softkey.

oDial 10, or move the cursor to 10.Key Tone using the Previous-Next softkeys and press the OK

softkey.

o	Press the		Yes	softkey to enable the Key Tone, or press the				08:30
	No	softkey to disable the Key Tone.
						Key Tone
o	Move to another parameter with the navigation buttons and					Current value is ‘Yes’
							Yes	No
	continue the session or press the Settings (				) button to

exit the configuration session.

5.10. Bluetooth Headset

Your IP8830 phone can be equipped with an optional Bluetooth module; you can use a Bluetooth headset with your phone. The icon appears in the upper line of the LCD if the module is installed. Instructions for installing the module are provided with the module or can be found in the IP8800 Installer Guide.

When paired and connected to a compatible Bluetooth headset, such as the IP-8502, the headset can control the On/Off hook status of the phone and audio is delivered from the IP8830 to the headset using wireless Bluetooth technology. In order to use a Bluetooth headset, the headset must be paired with and activated in the IP8830. The following sections provide instructions for setting up your IP Phone for use with a Bluetooth headset. Note the Bluetooth menus discussed below are only available and displayed when a Bluetooth module is installed on your IP Phone.

20 Dec. ‘08