Mitel WAP54GP manual The Administration - Management Tab, AP Password, Web Access, Snmp

Models: WAP54GP

1 68
Download 68 pages 56.52 Kb
Page 34
Image 34
The Administration - Management Tab

Wireless-G Access Point with Power Over Ethernet

The Administration - Management Tab

On this screen you can configure the password, Web Access, and SNMP settings.

AP Password

You should change the username/password that controls access to the Access Point’s Web-based Utility.

Local AP Password

User Name. Modify the administrator username. The default is admin.

AP Password. Modify the administrator password for the Access Point’s Web-based Utility. The default is admin. Re-enter to confirm. To confirm the new Password, enter it again in this field.

Web Access

To increase the security on accessing Web-based Utility. You can enable HTTPS. Once enabled, users need to use https:// when accessing the Web-based Utility.

Web HTTPS Access. Use secured HTTP session to access Web based Utility. The default is Disabled. Wireless Web Access. Allow or deny wireless clients to access Web based Utility. The default is Enabled.

SNMP

SNMP is a popular network monitoring and management protocol. It provides network administrators with the ability to monitor the status of the Access Point and receive notification of any critical events as they occur on the Access Point.

To enable the SNMP support feature, select Enabled. Otherwise, select Disabled. The default is Disabled.

Identification

Contact. Enter the name of the contact person, such as a network administrator, for the Access Point.

Chapter 6: Configuring the Wireless-G Access Point with Power Over Ethernet

Figure 6-19: Administration - Management

28

The Administration - Management Tab

Page 34
Image 34
Mitel WAP54GP manual The Administration - Management Tab, AP Password, Web Access, Snmp