Mitsubishi Electronics 2.5KKC, PLH-2 Introduction Components, Indoor unit and remote controller

E

E

2.Introduction

3.Components

A

ON/OFF –

CENTRALLY CONTROLLED		1Hr.
CHECK	ON OFF	˚C	FILTER
	CLOCK

B			CHECK MODE
	STAND BY	˚C	TEST RUN
	DEFROST		NOT AVAILABLE

E

F

D

C

B

A

ON/OFF –

CENTRALLY CONTROLLED	1Hr.
ON	OFF	FILTER
CHECK	˚C
		CHECK MODE
˚C		TEST RUN
	NOT AVAILABLE
G

This air-conditioner unit is designed for maximum efficiency and ease of use. You can use it to cool, heat or dehumidify a room by making the appropriate settings on the wall-mounted remote controller. Once you have made your settings, operating the unit is usually a matter of simply press- ing the POWER ON/OFF button.

The automatic cooling/heating mode allows setting of an optimum room temperature to which the air conditioner automatically adjust the room temperature.

sAfter you have read this manual, keep it and the Installation Manual in a safe place for easy reference whenever a question arises. If the unit is going to be operated by another person, make sure that this manual is given to him or her.

A Indoor unit

B Remote controller

3.1. Indoor unit and remote controller

The indoor unit is mounted into the ceiling of your room and puts out air (cool, warm or dry) according to the settings you make using the remote controller mounted on the wall.

AAir intake: Draws air in a room.

BHorizontal air outlet: To be automatically set in the horizontal blowing posi- tion in either COOL or DRY mode operation.

CDownward air outlet

DAutomated vane: Helps circulate air upward and downward or adjusts air- flow direction.

EAir filter

FDecorative panel

GRemote controller

6