Mitsubishi Electronics 2033C Load on inverter INV OP. green, Battery operation BAT OP. yellow

MITSUBISHI	2033C SERIES UPS	Page Number:
ELECTRIC	OWNERS / TECHNICAL MANUAL	2-4

DATE & CLOCK SETUP SCREEN

Pressing the lower right of the MAIN MENU Screen will display the date & clock setup screen. On Pressing the END Touch Icon, the display returns to the MAIN MENU Screen.

FIGURE 2.5 DATE & CLOCK SETUP Screens

	【現在時刻】
	【	SET		CLOCK		】					END
											終了
		1 /1 / 2000					12 : 00 : 00
2000年				1月	1日		12時		分	00秒
5			6	7	8		9	-	▲		CLR
0			1	2	3		4		▼		ENT

Pressing the each point can set the date or clock.

NOTE: The display measurement values shown for LCD Monitor Displays are samples only.

2)Load on inverter [INV OP.] (green)

Illuminated when power is supplied from inverter to the critical load.

3)Battery operation [BAT OP.] (yellow)

Illuminated when the battery is operating following an AC power failure.

4)Load on bypass [BYP OP.] (yellow)

Illuminated when power is supplied to load devices by static bypass.

5)UPS failure [FAILURE] (red) Illuminated when UPS is in fault mode.

6)Inverter start [START] (green) Inverter start button.

When pressed, the load will transfer from the static bypass line to the inverter.

7)Inverter stop [STOP] (gray)

Inverter stop button. When pressed, the inverter can be stopped. The load will transfer from the inverter to the static bypass line.

8)Alarm Silence [SILENCE] (gray)

Audible alarm is silenced when this button is pressed.

9)Clear [CLEAR] (gray)

Clears errors in UPS system.

10)Emergency Power Off [EPO] (red)

Shuts down UPS when pressed. Load is dropped.

11)Load on maintenance bypass [MBP] (red)

Illuminated when power is supplied to load devices by maintenance bypass.

MITSUBISHI ELECTRIC 2033C SERIES UPS