Mitsubishi Electronics 2033C AC Input Characteristics, Battery, AC Output, Environmental

MITSUBISHI		2033C SERIES UPS					Page Number:
ELECTRIC	OWNERS / TECHNICAL MANUAL						1-15
TABLE 1.3 Detail of Specifications
Rated Output kVA	7.5		10	15	20	30		40	50
Rated Output kW	6		8	12	16	24		32	40
	AC INPUT CHARACTERISTICS
Configuration	3 phase, 4 wire
Voltage	120/208 V		+15% ~ -25%
Frequency	60 Hz +/- 5%
Reflected Current THD	4% typ. at 100% load; 7% typ. at 50% load
			BATTERY
Type	VRLA
Ride Through	8min.		5min.	11min.	7min.	5min.
(at 100% load)
Nominal Voltage	360 Vdc
Minimum Voltage	300 Vdc
Number of Cells	180
			AC OUTPUT
Configuration	3 phase, 3 or 4 wire
Voltage	120/208 V
Voltage Stability	+/-1%
Frequency	60 Hz
Frequency Stability	+/-0.01% in free running mode
Power Factor	0.8 nominal
Power Factor range	0.8 ~ 1.0 lagging (within output kW rating)
Voltage THD	2% typical THD at 100% Linear Load
	4% typical THD at 100% non-linear load
Transient Response	+/-3% typical at 100% load step
	+/-1% typical at loss/return of AC power
	+/-3% typical at load transfer to/from static bypass
Transient Recovery	16.7 ms
Voltage Unbalance	2% typical at 100% unbalanced load
Phase Displacement	1deg. typical at 100% load
Inverter Overload	150% for 1 minute
System Overload	150% for 1 minute, 1000% for 1 cycle (with bypass available)
Bypass Overload	150% for 1 minute, 1000% for 1 cycle
Crest Factor Capabilities	3:1
			ENVIRONMENTAL
Cooling	Forced Air
Operating Temperature	32ﾟF ~ 104ﾟF (0ﾟC ~ 40ﾟC).
	Recommended 59ﾟF ~ 77ﾟF (15ﾟC ~ 25ﾟC)
Relative Humidity	5% ~ 95% Non Condensing
Altitude	0 ~ 5000 feet No De-rating
Location	Temperature-controlled, indoor area free of conductive contaminants

MITSUBISHI ELECTRIC 2033C SERIES UPS