60
For assistance call 1(800) 332-2119
5
NetCommand IR Control
NetCommand IR home-theat er control is avail-•
able on 265 series TVs.
IR emitter cables are avail able for purchase •
from Mitsubishi.
Visit www.mitsuparts.com or call
800-553-7278 and
request one of the following:
242D483020 - (two-ended cable)
299P254020 - (four-ended cable).
NetCommand setup is optional.•
You can perform NetCommand setup for a device •
any time after the TV has detected the device.
NetCommand operates by sending remote control •
signals from the TV to your other devices via the
Important Note on NetCommand
Be sure to connect the IR emi tter cable to the
TV and properly place t he emitters so that
NetCommand can control you r devices.
IR (infrared) emitters, telling the devices to play,
record, change inputs, adjust volume, change chan-
nels, or perform other functions. All this is accom-
plished with the TV’s remote control left in
TV
mode.
You may wish to use NetCommand IR control to •
supplement control of CEC-enabled devices.

About NetCommand IR Control

Downloaded From TV-Manual.com Manuals