A/V Receiver
Most setups require either a digital audio cable or analog stereo audio cables. To send audio from TV channels received on the ANT input or devices con- nected directly to the TV, you must use one of the con- nections shown below.
The TV makes all audio available in digital and analog formats:
•Analog audio coming into the TV is available as output in digital stereo format on the DIGITAL AUDIO OUTPUT jack.
•Digital incoming audio is available as analog output on the AUDIO OUTPUT L and R jacks.
2. TV Connections | 13 |
Required: One
This option allows you to view content from devices connected to an A/V receiver. The A/V receiver can
send audio and video to the TV over a single HDMI cable. You can use an HDMI connection as described
here in addition to an audio connection from the TV's
audio output. The optional audio connection allows you to hear, through the A/V receiver, devices connected to the TV only, e.g., an antenna on the ANT input.
838 Series: This setup allows you to use Net-
ii( : i¸ ::::
TV main panel
Digitalcoaxial cable(fora digital
A,_/receiver)
AUDIO
R OUTPUT L
or
Stereo analog cables (for an analog NV receiver)
AUDIO
R OUTPUT L
TV
| _HHH_ |
HDMI cable t | Optional : |
analog or | |
| digital audio |
| connection |
| z |
| _HHHL |
HDMIOUT | DIGITAL | R | L |
A/V receiverwith | AUDIO IN | ANALOGAUDIOIN |
HDIVIIoutput
Any connection types
A/V receiver back panel
Note:
®On rare occasions, an HDMI signal may be
For assistance call 1(800)