Mitsubishi Electronics AG-150A manual Group icon Operation mode display Set temperature display

Item

Group icon

Operation mode display

Set temperature display

Room temperature display

Description

(2) Ventilator (Lossnay) group operation condition

ON	OFF	Error	Filter sign
Schedule set	Energy saving

Note: When connecting multiple AG-150A controllers by connecting an Expansion Controller to the system, “Schedule set” and “Energy saving” will be displayed only on the AG-150A controller that is executing these functions.

(3) Hot water supply group operation condition

ON OFF Error Check water

Schedule set Energy saving

(4) General equipment group operation condition

ON OFF Error Schedule set

Note: Other than lighting icons, pump or card key icons are also available.

The operation mode is displayed here.

The set temperature is displayed here.

Note: The water temperature setting will be displayed for the hot water supply group.

The temperature of the indoor unit’s intake is displayed here.

Note: Because the temperature displayed here is of the indoor unit’s intake, it could be different from the actual room temperature.

Note: The current water temperature will be displayed for the hot water supply group.

Note: The temperature display can be in either Celsius (°C) or Fahrenheit (°F) depending on the setting.

11