Mitsubishi Electronics GB-50ADA-J Checking the Operation Condition, Batch operation, Group name

3-2 Checking the Operation Condition

When you login correctly using the Login Screen, the screen used to monitor the operation conditions of air conditioner and general equipment and hot water supply groups will appear. If you wish to operate, click the group icon to switch to the operation screen.

Note: The operation condition display will not update automatically. If you wish to view the very latest condition, click [Update] on each screen.

Batch operation

Click to perform an operation on all groups at once.

Update to most recent condition

Click to update the screen so that the most recent condition is shown.

Group name

Group names are displayed.

Group icons

These icons are used to indicate the operation condition of an air conditioner or a general equipment group. Switch to the operation screen by clicking the icon.

Set temperature display

The set temperature is displayed here.

Room temperature display

The temperature of the indoor unit’s intake is displayed here.

Operation mode display

The operation mode is displayed here.

Item

Update to most recent condition

Batch Operation

Group name

Group icon

Description

Click [Update] to ensure the displayed items reflect the most recent operation condition.

Click [Batch Operation] if you want to perform an operation on all groups at once. Group names are displayed.

The operation condition is indicated by the icon that is displayed. When you point to a group icon with the mouse cursor, the group name is displayed. To switch to the operation screen, click on the icon. The icons used to indicate the operation condition are shown below.

(1) Air conditioner group operation condition

ON	OFF	Error	Filter sign
Interlocked	Interlocked	Schedule set	Energy saving
ventilator ON	ventilator OFF

Setback ON

Note: Other than 4-aiflow icons, 2-airflow or ceiling-suspended icons are also available. Select the icon type on Initial Setting Web.

Note: If a given LOSSNAY unit is interlocked with multiple indoor unit groups, the LOSSNAY unit may be in operation even when the display shows that the unit is stopped.

Note: When setting ventilation interlock with Mr. Slim units, the air conditioning and interlocked ventilation icon will display ON even when the interlocked LOSSNAY is operating by itself. (This will occur when used with the following M-NET adapter:PAC-SF48/50/60/70/80/81MA-E)

Note: When connecting multiple AG-150A controllers by connecting an Expansion Controller to the system, “Schedule set,” “Energy saving,” and “Setback ON” will be displayed only on the AG-150A controller that is executing these functions.

10