Item
Interlocked ventilator ON/OFF *1
Fan speed of interlocked ventilator
Operation Prohibition mark
Description
Click [ON] or [OFF] to switch interlocked ventilator ON or OFF.
Note: For groups that are not connected to an interlocked ventilator, the items related to interlocked ventilators are not displayed.
Click 
to adjust the fan speed of the interlocked ventilator.
Note: For groups that are not connected to an interlocked ventilator, the items related to interlocked ventilators are not displayed.
When air conditioners are centrally controlled, the central control mark will be displayed, and if
the prohibit setting has been set for any operations, the operation prohibition mark [ ] will be displayed next to those operation items.
If the prohibit setting has been set for an item, it is not possible to operate that item.
*1: The change on the interlock setting between the indoor and LOSSNAY units made on the indoor unit side will not be reflected on the LOSSNAY unit side on the screen until the OK is pressed and the change is saved. The actual interlock setting, however, is immediately effective, so as soon as the interlock setting on the indoor unit side is set to ON, the LOSSNAY unit will go into operation when one or more indoor units go into operation regardless of the display on the screen.
3-3-2 Adjusting the operation conditions that target all groups
(1)Click [Batch Operation] from the operation condition monitoring screen that displays all groups in a list. When air conditioner groups, ventilator (LOSSNAY) groups, and general equipment groups exist together in the List, a new screen will appear to select the group. Click one of the [All
If there is only air conditioner groups or only LOSSNAY groups or only hot water supply groups or only general equipment groups, this selection screen will not appear.
(2)After you have made the settings on the screen for batch operation, click [OK] and only the items for which operation was performed will be sent to all the air conditioner, ventilator (LOSSNAY) groups, hot water supply groups or general equipment groups.
To return to the previous screen without performing any
operations, click [Cancel].
Note: If the setting range for set temperature is restricted, the temperature setting range will be smaller.
Note: If operation of an item has been prohibited, then operation is not possible for that item.
13
