CONNECTION WITH SCSI DATA SIGNAL EQUIPMENT
Make sure to turn off main power of the unit and other equipment before connection. Set the MODE switch No. 1 to OFF (SCSI).
(CONNECTION)
|
|
| Terminator |
To SCSI port |
|
| ID No. switch |
To SCSI port |
| SCSI |
|
|
|
| ID No. |
| ON |
|
|
SCREW | OFF | 1 2 3 4 5 6 7 8 |
|
| PARALLEL | ||
|
| DIRECT SNAP | |
|
| ACK | AC LINE |
|
| ON PARALLEL | |
|
| OFF SCSI |
|
Personal computer | Digital Color printer |
When this unit is not connected to the other equipment through another SCSI port, make sure to attach a terminator on the SCSI port which is not used. See the operation manual of an equipment to be connected for attaching terminator.
Setting SCSI2 ID switch
SCSI ID switch
ID No.
Select the ID number among 1 to 6.
Turn the arrow to set the ID number with a screwdriver.
The default setting is No. 5.
No. 7 is provided for personal computer you use and No. 0 is provided for a
NOTE
Make sure to turn on the power again when SCSI ID number is changed with the power turned on.
Setting ON2LINE status
POWER
1 Press POWER button to turn on this unit.
The lamp over the POWER button is lit.
PRECAUTIONS | |
|
|
FEATURES |
|
| |
CONNECTIONS | |
PREPARATION |
|
SHOOTING | |
|
|
OTHERS |
|
|
|
9