BEFORE OPERATION

USAGE AND KEEPING OF PAPER SHEET SET

NOTE

•Fingerprints or dust on the paper’s surface may degrade print quality and cause paper jams. Immediately after the paper is replaced, 2-3 images may be printed with a blank part due to hand’s dust or oil.

•When print paper is rapidly transferred from a cool place to a hot place, vapor or dew will be generated on the paper’s surface causing paper jams or degraded print quality. Leave the print paper in the room to stabilize its temperature be- fore using it.

•When print paper and ink sheet runs out during printing, the printing operation stops and “SHEET/PAPER” lamp on the front panel is lit.

•If paper feeding is repeated while installing the print paper, the indicated num- ber of prints may not be done.

AFTER PRINTING2

Surface-laminated print paper which is durable and keeps picture quality is suitable for this unit. If using print paper without surface laminating, please pay attention to the following points.

•When the printed paper is touched by a wet hand, the print may be discolored.

•Fading may occur if the print-face is exposed to organic chemical agents which may affect print paper (e.g., alcohol, ester, ketone based). Fading will be accelerated upon contact with PVC-based materials (e.g., adhesive tapes, rubber erasers, etc.).

STORAGE2

•Leaving the print paper in contact with PVC- based materials causes color of print paper to come off and to be stained.

•Never store print paper in places that are hot, humid or places exposed to direct sun- light, otherwise color will fade.

Keep print paper in a place where;

temperature : 5 – 40 C

humidity

: 20 – 80 %RH

•If the print paper is installed for two or more days, the prints may be rolled after printing. There is no cause for alarm because the print paper is rolled on the inside of the print- ing unit.

16