Using the menus
The projector is equipped with
Below is the overview of the OSD menu.
Main menu icon 
Main menu
Highlight
Current input signal 
Status
Press MENU/ 
EXIT to go
back to the previous page or to exit.
Below is an example about how to set the OSD language.
1. Press MENU/EXIT on the projector or remote | 3. Press to highlight Language and press / |
control to turn the OSD menu on. | to select a preferred language. |
2.Use 
/ 
to highlight the SYSTEM SETUP: Basic menu.
4.Press MENU/EXIT twice* on the projector or remote control to leave and save the settings.
*The first press leads you back to the main menu and the second press closes the OSD menu.
