Mitsubishi Electronics EX320U Menu display time, Menu position, Lamp mode, Reset lamp timer

4. SYSTEM SETUP: Basic menu

5. SYSTEM SETUP: Advanced menu

FUNCTION	DESCRIPTION
Presentation Timer	Reminds the presenter to finish the presentation within a certain time
	frame. See "Setting the presentation timer" on page 32 for details.
Language	Sets the language for the On-Screen Display (OSD) menus. See "Using
	the menus" on page 22 for details.
Projector Position	See "Choosing a location" on page 11 for details.
Auto Power Off	Allows the projector to turn off automatically if no input signal is
	detected and no operation is made by user after a set period of time. See
	"Setting Auto Power Off" on page 49 for details.
Blank Timer	Sets the image blank time when the Blank feature is activated, once
	elapsed the image will return to the screen. See "Hiding the image" on
	page 33 for details.
Panel Key Lock	Disables or enables all panel key functions except II POWER on the
	projector and keys on the remote control. See "Locking control keys"
	on page 33 for details.
Timer Controller	Sets the auto-shutdown timer. The timer can be set to a value between
	30 minutes and 12 hours.
Splash Screen	Allows you to select which logo screen will be displayed during
	projector start-up. Three options are available: MITSUBISHI logo,
	Black screen, or Blue screen.
	Selecting On enables the function and the projector cooling time will be
Quick Cooling	shortened to a few seconds.
	If you attempt to restart the projector right after the quick cooling
	process, it may not be turned on successfully and will rerun its
	cooling fans.
Audio Settings	See "Adjusting the sound" on page 33 for details.
	Selecting On enables the function. The projector can output a VGA
	signal when it is in standby mode and the COMPUTER-1and
	MONITOR OUT jacks are correctly connected to devices. See
	"Connecting a monitor" on page 17 for how to make the
Standby Monitor Out	connection.
	•Enabling this function slightly increases the standby power
	consumption.
	•When the projector enters standby mode, the Video will be
	interrupted briefly. This is not a product malfunction.
	Menu display time
	Sets the length of time the OSD will remain active after your last key
Menu Settings	press. The range is from 5 to 30 seconds in 5-second increments.
	Menu position
	Sets the On-Screen Display (OSD) menu position.
	Lamp mode
	See "Setting Lamp mode as Low" on page 49 for details.
Lamp Settings	Reset lamp timer
	See "Resetting the lamp timer" on page 52 for details.
	Equivalent lamp hour
	See "Getting to know the lamp hour" on page 49 for details on how
	the total lamp hour is calculated.

EN-46