Connect 232ADP and a personal computer,and exchange data with the PC.

Personal computer

FX0N series sequencer

Send

 

Receive

• Send data

• Receive data

• Send data

• Receive data

 

Use the communication cable suited to the connector pin configuration of the personal computer.

(For representative wiring see section 4.)

Preparation of software

Use ordinary communication software (terminal emulator) or dedicated program in the personal computer.

The communication format of the PC for this example is as follows.

Data length

8 bit

Parity

Even

Stop bit

1 bit

Baud rate

2400

If the communication format of the software cannot be adjusted to this setting, adjust the PC and the software to be the same.

Page 7
Image 7
Mitsubishi Electronics FX0N-232ADP manual Preparation of software