8
4-2 Setting Basic Information and External Input Functions Display the page needed to perform the GB-24A basic setting by clicking [Initial Settings]-[Basic System] in the
setting menu pane. On this page, set the GB-24A unit name, network, and M-NET. Click [Save Settings] to
save the set data to the GB-24A. After the setting data are sent to the GB-24A, a message will appear asking
whether or not to restart the GB-24A. Click [OK] to restart the GB-24A and apply the changes.
Note: If the user logs in as a manager, the operations may be prohibited.
4-2-1 GB-24A Unit Setting
In “Unit Settings” on the [Basic System] screen, set the GB-24A name and unit ID.
(1) Enter the GB-24A unit name in the [Name] field. A maximum of 40 alphanumeric or symbol characters can
be entered. The name set here is used on the display screen of the software that controls multiple GB-24A
units and for the name of the sender in the body of error messages.
Note: The following characters cannot be used in the name: < > & " '
(2) Enter the GB-24A unit ID in the [Unit ID] field. Six numbers must be included. Use this setting when it is
necessary to control multiple GB-24A units with unit IDs. The unit ID that is entered will be used on the
display screen of the software that controls multiple GB-24A units and for the sender ID in the body of error
messages.
(3) When [Refresh] is clicked, the GB-24A production ID will appear in the [SERIAL No.] field and the GB-24A
software version will appear in the [Software Version] field.
Unit Setting
Set the GB-24A name
and unit ID.
Network Setting
Set the GB-24A IP address
and subnet mask.
M-NET Setting
Set the GB-24A M-NET
address, presence/absence of
K-Control units and range of
prohibited controllers.
External Input Setting
Set the GB-24A external input
setting.
Display Format
Set the items related to the
screen display on the Web.
Save Settings
Send setting data to GB-24A.
Refresh
Read setting data from G-24A.