Mitsubishi Electronics GB-24A operation manual Setting the Mail Server Information

5-1-2 Setting the Mail Server Information

Enter the mail server information provided by either the ISP or the LAN administrator.

Either the IP address or the host name (server name) can be entered in the mail server field.

Make necessary settings depending on the functions to be used, using the table below as a reference.

Table 5-2 Items that Require Settings to Be Made (Mail Server Information)

Functions	Error Mail Report		Mail Communication
	No SMTP	Uses SMTP	No SMTP	Uses SMTP
Items
	Authentication	Authentication	Authentication	Authentication
Outgoing Mail Server (SMTP)	V	V	V	V
	IP Address or		IP Address or
		Host Name		Host Name
	Host Name		Host Name
SMTP Authentication		V		V
			V	V

Incoming Mail Server (POP3)			IP Address or	IP Address or
			Host Name	Host Name
DNS Server (Primary)	(V)*1	V	(V)*1	V
DNS Server (Secondary)	(V)*1	V	(V)*1	V

*1: Not necessary if the IP address is used as the mail server address.

5-1-3 Setting the Error Mail Destinations

(1)Enter the title of the error mail that will be sent from GB-24A in the [Mail Title] field. The title may contain a maximum of

40 characters.

Note: The following characters cannot be used in the mail title:

<> & “ ‘

(2)Choose the error type out of the following: [Unit Error], [Preliminary Unit Error], [Communication Error], [General Equipment] and [User Setting 1] through [User Setting 6]. Then enter the mail address of the recipient of the error mail.

(3)To send error messages only upon occurrences of certain errors, click the User Setting button that appear when "User Setting 1" through "User Setting 6" are selected, and register the error codes to be reported in the user settings. A maximum of 20 error codes can be set for each user setting. In addition to specific error codes such as [1302] or [6607], codes such as [10**] or [12**] can also be used. If [10**] is set, for example, error mail will be sent upon an occurrence of any type of errors between [1000] and [1099]. If error codes are set on this screen, confirm that the address of the recipient is registered.

(4)Do not select "General Equipment."

20