Mitsubishi Electronics GB-24A operation manual Setting the Addresses of the Recipient, Mail format

5-1-4 Setting the Addresses of the Recipient

To monitor and operate the unit with the maintenance tool via mail from a remote location, enter the mail address of the receiver in the [Mail Communication Setting].

A maximum of 10 addresses can be registered.

E-mail communication is possible only with the recipients whose addresses are registered on this screen.

5-1-5 Mail format

Error mails are sent in the format shown below.

From:Mitsubishi Building(000001)

Date:11/09/2005 16:32:12

Error unit:065

Error code:1302

Status:Occurrence

Item	Format	Remarks
Mail title	Set title	Refer to 5-1-3 (1) for the setting of mail title.
From	GB-24A unit name and unit ID	Refer to 4-2-1 for the setting of GB-24A unit
		name and unit ID.
Date	dd/MM/yyyy hh:mm:ss	Date of error
		Note: The date format set in section 4-2-5 will be
		applied.
		Note: When an error occurs on the general
	When an error occurs on air conditioners and	equipment that is connected via DIDO
		controller, M-NET address of the DIDO
Error unit	general equipment
		controller will be sent. (which means an error
	- M-NET address of the error source
		occurs on one of the general equipment that is
		connected to the DIDO controller)
		When an error occurs on air conditioners
Error code	4-digit error	Refer to the service manual for each unit.
		When an error occurs on general equipment
		0091:General equipment error
Status	"Occurrence" or "Recovery"	Error status

21