Mitsubishi Electronics HC3900 Menu operation, How to set the menus, Image menu, Setting Function

Menu operation (continued)

How to set the menus:

The following describes how to set AUTO POWER OFF time as an example.

1.Press the MENU button.

opt.

IMAGE AV MEMORY 1

2.Press the t or u button to select a menu to use.

opt.

INSTALLATION AV MEMORY 1

3.Press the ENTER button (or q button).

opt.

INSTALLATION	AV MEMORY 1
KEYSTONE	0

4. Press the p or q button to select an item to adjust.

AUTO POWER	OFF
ON
AUTO POWER	OFF
OFF

5. Set the selected item by pressing the t or u button.

AUTO POWER	OFF
ON
AUTO POWER	30 min
OFF

To cancel the menu:

6. Press the MENU button several times.

Important:

•When the MENU button doesn’t function, unplug the power cord from the wall outlet. Wait about 10 minutes, plug the power cord in, and try again.

•After selecting the items marked with , press the ENTER button.

Available settings in the menus

Set the following items on their relevant menus.

1. IMAGE menu

ITEM	SETTING		FUNCTION
GAMMA MODE	AUTO		The proper gamma mode is automatically selected
			depending on the input signal. Default is AUTO.
	SPORTS		This is a bright mode suitable for watching sports
			images.
	VIDEO		This is a standard mode suitable for watching video
			images, etc.
	CINEMA		This is a mode for watching movies in dim lighting as
			in a theater.
	USER1	/	Select to adjust the gamma curve. (See page 33.)
	USER2
CONTRAST	±30		Use to adjust the contrast of the projected image. (See
			page 31.)
BRIGHTNESS	±30		Use to adjust the brightness of the projected image.
			(See page 31.)

1. IMAGE menu

opt.
IMAGE	AV MEMORY 1
GAMMA MODE	AUTO
CONTRAST	0
BRIGHTNESS	0
COLOR TEMP.	MEDIUM
COLOR	0
TINT	0
SHARPNESS	0
BrilliantColorTM	AUTO
ADVANCED MENU	OK
AV MEMORY	AV MEMORY1
SAVE

COLOR TEMP.	5 options		Use to adjust the color temperature. (See page 32.)
COLOR	±10		Use to adjust the color thickness of the projected image. (See page 31.)
TINT	±10		Use to adjust the color tint of the projected image. (See page 31.)
SHARPNESS	±5		Use to adjust the sharpness of the projected image. (See page 31.)
BrilliantColorTM	AUTO		BrilliantColorTM works automatically in response to the gamma mode. (See page 31.)
	0 - 10		Use this setting to make colors with medium brightness, such as yellow and the skin tone appear
			natural. Press the t button to decrease the value to lessen the effect. Press the u button to
			increase the value to heighten the effect. (BrilliantColorTM has no effect at value 0.)
			• For more enhanced color reproduction, set BrilliantColorTM to 0. The white area of the color
			wheel is disabled, and you can reproduce true-color images.
ADVANCED MENU
SCREEN SIZE	2 options		Select according to the screen size.
VERTICAL	±26		Use to adjust the position (height) of the projected image.
LOCATION
CTI	0 - 5		Use to correct smeared color boundaries.
INPUT LEVEL	±5		For analog signal input: The input level of video signal differs among devices to be connected.
			High input level causes solid white in displayed image and low input level causes displayed image
			to get dark. Use this menu to adjust the input level of analog video signal.
	AUTO /		For digital signal input:
	ENHANCED /		AUTO:	The proper setting is automatically selected.
	NORMAL		ENHANCED:	Select when solid black occurs.
			NORMAL:	Select when grayish black occurs.
			(See page 16.)
COLOR	ON	/ OFF	When you turn COLOR MANAGEMENT on, you can change to any desired color by adjusting
MANAGEMENT			each of GAIN and SATURATION of six different colors. (See page 33.)
AV MEMORY SAVE	3 options		Select the AV MEMORY to which you save the current setting. (See page 30.)

•By using the AV memory function, you can save up to 3 setting patterns of IMAGE menu for each input terminal. (See page 30.)

•INPUT LEVEL is unavailable when the digital signal is supplied from the YCBCR/YPBPR terminal of the connected device.

EN-26