Mitsubishi Electronics LDT52IV (MT819) Basic Operation „Switching the screen size, Dot by Dot

Basic Operation

„Switching the screen size

Even when the screen size is changed, the display may remain the same depending on the input signal.

WIDE

ZOOM 1

ZOOM 2

NORMAL

Dot by Dot

PC input	Displays image so it fills the entire screen.
AV input	An image with a 4:3 aspect ratio is stretched to fill the entire
	screen.
PC input	An image with a 4:3 aspect ratio is enlarged to fill the entire screen
	without changing the aspect ratio. The edges of the image may be
	cut off.
AV input
PC input	Use this size if ZOOM 1 cuts off the subtitles.
AV input
PC input	Displays image so it fills the screen without changing the aspect
	ratio of the input signals.
AV input	Displays the entire image of the aspect ratio of 4:3 without
	changing the aspect ratio.
PC input	Displays the dots of the signals input from the connected PC as
	the corresponding dots on the screen. *
AV input	Displays the dots of the input signals as the corresponding dots on
	the screen.

*: With a monitor of screen resolution 1600 x 1200 or 1920 x 1200, selecting Dot by Dot displays the NORMAL screen.

TIPS

•Using this monitor’s screen-size switching or dual-screen display functions to compress or expand the screen for commercial or public viewing in establishments like cafes or hotels may infringe on the rights of the creators, as protected by Copyright Law, so please be careful.

•When “Enlarge” is set, the screen size is fixed to “WIDE” mode.

•When dual-screen display is selected, the screen size cannot be changed.

•The appearance of the original video may change if you select a screen size with a different aspect ratio than the original image (e.g. TV broadcast or video input from external equipment).

•When an ordinary non-wide image (4:3) is viewed with the whole screen using the screen-size switching function of this monitor, the edge of the image may be lost or appear distorted. If you wish to respect the creator’s intentions, set the screen size to “NORMAL”.

•When playing commercial software, parts of the image (like subtitles) may be cropped. In this case select the optimal screen size using the screen-size switching function of this monitor. With some software, there may be noise or distortion at the edges of the screen. This is due to the characteristics of the software, and is not a malfunction.

•Depending on the original image size, black bands may remain at the edges of the screen.

Downloaded From TV-Manual.com Manuals

E 4