Mitsubishi Electronics LDT52IV (MT819) manual „ENLARGE PC input, „PIP/PbyP, „Dual screen display

Menu Items

COLOR SYSTEM (AV4/AV5)

Select the color system of the AV equipment which is connected to AV4 and AV5 input terminal. (AUTO / PAL / PAL-60 / SECAM / NTSC3.58 / NTSC4.43)

When AUTO is selected, the color system is automatically set according to the input signal.

„ENLARGE (PC input)

ENLARGE H

Sets the number of screen splits (number of monitors) in the horizontal direction used for the enlargement. (See page 9.)

ENLARGE V

Sets the number of screen splits (number of monitors) in the vertical direction used for the enlargement. (See page 9.)

ENLARGE-POS H / ENLARGE-POS V

Specify the split screen to be displayed when the enlargement function is used. (See page 9.)

BEZEL H / BEZEL V

Sets the frame width of the display when the enlargement function is used.

H-POS

Adjust the horizontal position of the enlarged screen.

V-POS

Adjust the vertical position of the enlarged screen.

„PIP/PbyP

PIP MODES

Sets the display method.

OFF	Displays one screen.
PIP	Displays a sub screen inside a main screen.
PbyP	Displays a main screen and a sub screen in a line.
PbyP2	Displays a main screen which measures 1280 pixels
	in the longest direction and a sub screen in a line.

PIP SIZE

Sets the size of the sub screen in PIP mode.

PIP H-POS

Adjusts the horizontal position of the sub screen in PIP mode.

PIP V-POS

Adjusts the vertical position of the sub screen in PIP mode.

PIP BLEND

In PIP mode, use this menu item to display the sub screen transparently.

PIP SOURCE

Selects the input signal of the sub screen in PIP, PbyP, or PbyP2 mode.

SOUND CHANGE

Sets the sound which is output in PIP, PbyP, or PbyP2 mode. If the main screen is displayed as a full screen by the AUTO OFF function, the sound for the main screen is output even when the sound for the sub screen is specified.

MAIN POS

Sets the position of the main screen in PbyP or PbyP2 mode.

PbyP2 POS

Sets the position of the sub screen in PbyP2 mode.

AUTO OFF

Sets the display method when no signals for the sub screen are input in PIP, PbyP, or PbyP2 mode.

MANUAL	Displays a main screen and a black sub screen.
AUTO	Displays the main screen as a full screen.

TIPS

•When WHITE BALANCE is set to THRU, BLACK LEVEL, CONTRAST, TINT, COLORS and GAMMA cannot be set.

•If COLOR MODE is set to sRGB or VIVID, the following items cannot be set.

WHITE BALANCE, PRESET, R-/G-/B-CONTRAST, COPY TO USER, and GAMMA

„Dual screen display

You can display the screens of the PC input signal and AV input signal simultaneously.

Set this function with “PIP MODES” in the PIP/PbyP menu.

PIP				A sub screen is displayed
	Main screen			inside a main screen.
		Sub
		screen
PbyP				A main screen and a sub
	Main		Sub	screen are displayed in a
				line.
	screen	screen
PbyP2				Displays a main screen
				which measures 1280
			Sub
	Main screen			pixels in the longest
			screen
				direction and a sub
				screen in a line.

*The currently selected input signal is displayed on the main screen.

*You cannot simultaneously display the screens of signals of the same type, such as two types of PC input signals or two types of AV input signals.

*The dual screen display cannot be used with the combination of PC1 and AV2 or of AV1 and PC2.

TIPS

•You might infringe on a copyright of the author which is protected by copyright law when you display the images of the computer screen and television/VCR simultaneously for profit-making or to show the image to the public.

•The screen size for dual-screen display is the same as the screen size for single-screen display. The Dot by Dot screen is displayed in NORMAL size except when it is set as the PIP main screen.

•When dual-screen display is selected, the AUTO INPUT CHANGE function is disabled.

•When dual-screen display is selected, the SCREEN MOTION function is disabled.

•When dual-screen display is selected, the screen cannot be enlarged.

•When dual-screen display is selected, the following adjustments of ADVANCED are invalid and adjusting is disabled.

3D-NR, MPEG-NR and 3D-Y/C

•When dual-screen display is selected, the INPUT SELECT options cannot be set.

Downloaded From TV-Manual.com Manuals

E 8