Mitsubishi Electronics M557 user manual English-15, Monitor Specifications, Diamond Scan

Monitor Specifications Diamond Scan 72 Notes

Picture Tube	Diagonal:	43 cm (17 inch)
	Viewable Image Size:	41 cm (16 inch)
	Radius:	1210 mm

90° deflection,

0.27mm trio dot pitch, medium short persistence phosphor, multi-layered, anti-static screen coating, semi-tint screen,

Invar Shadow Mask and OptiClear screen surface.

English

Input Signal	Video:	ANALOG 0.7 Vp-p/75 Ohms
	Sync:	Separate sync. TTL Level
		Horizontal sync. Positive/Negative
		Vertical sync. Positive/Negative
		Composite sync. (Positive/Negative) (TTL Level)
Display Colours	Analog input:	Unlimited number of Colours	Depends on display card
			used.
Synchronization Range	Horizontal:	30 kHz to 70 kHz	Automatically
	Vertical:	50 Hz to 120 Hz	Automatically

Resolutions Supported

Resolution based on horizontal and vertical frequencies only

640 x 480 @ 60 to 120 Hz		Some systems may not
800 x 600 @ 50 to 110	Hz	support all modes listed.
832 x 624 @ 50 to 106 Hz
1024 x 768 @ 50 to 87	Hz........NEC-Mitsubishi Electronics
1152 x 870 @ 50 to 77	Hz	Display cites recommended
1280 x 1024 @ 50 to 66 Hz		resolution at 85 Hz for
		optimal display performance.

Active Display Area	Horizontal:	310 mm	Dependent upon signal
(Factory setting)	Vertical:	232 mm	timing used, and does not
			include border area.
Active Display Area		328 mm	Dependent upon signal
(Full scan)		246 mm	timing used, and does not
			include border area.
Power Supply		AC 100 - 240V, 50 - 60 Hz
Current Rating		2.0 A @ 100 - 240V
Dimensions		404(W) x 420(H) x 412(D) mm
Weight		16.2 kg
Environmental Considerations
Operating Temperature:		0 °C to +35 °C
	Humidity:	30% to 80%
	Altitude:	0 to 3000 m
Storage Temperature:		-20 °C to +60 °C
	Humidity:	10% to 90%
	Altitude:	0 to 13700 m

NOTE: Technical specifications are subject to change without notice.

English-15

01_english 15 24/5/01, 3:23 pm