7 SERVICE FUNCTIONS

MSZ-FD09NA MSZ-FD12NA

7-1. TIMER SHORT MODE

For service, set time can be shortened by short circuit of JPG and JPS the indoor electronic control P.C. board. The time will be shortened as follows. (Refer to 9-7.)

Set time : 1-minute 1-second

Set time : 3-minute 3-second (It takes 3 minutes for the compressor to start operation. However, the starting time is shortened by short circuit of JPG and JPS.)

7-2. P.C. BOARD MODIFICATION FOR INDIVIDUAL OPERATION

A maximum of 4 indoor units with wireless remote controllers can be used in a room.

In this case, to operate each indoor unit individually by each remote controller, P.C. boards of remote controller must be modified according to the number of the indoor unit.

How to modify the remote controller P.C. board

Remove batteries before modification.

The board has a print as shown below :

NOTE : For modification, take out the batteries and press the OPERATE/STOP (ON/OFF) but- ton twice or 3 times at first.

After finish modification, put back the bat- teries then press the RESET button.

J1 J2

The P.C. board has the print “J1” and “J2”. Solder “J1” and “J2” according to the number of indoor unit as shown in Table 1. After modification, press the RESET button.

Table 1

 

1 unit operation

2 units operation

3 units operation

4 units operation

 

 

 

 

 

No. 1 unit

No modification

Same as at left

Same as at left

Same as at left

 

 

 

 

 

No. 2 unit

—

Solder J1

Same as at left

Same as at left

No. 3 unit

—

—

Solder J2

Same as at left

No. 4 unit

—

—

—

Solder both J1 and J2

How to set the remote controller exclusively for particular indoor unit

After you turn the breaker ON, the first remote controller that sends the signal to the indoor unit will be regarded as the remote controller for the indoor unit.

The indoor unit will only accept the signal from the remote controller that has been assigned to the indoor unit once they are set.

The setting will be cancelled if the breaker has turned OFF, or the power supply has shut down. Please conduct the above setting once again after the power has restored.

10

Page 9 Page 11
Page 10
Image 10
Mitsubishi Electronics MSZ-FD09NA Service Functions, Timer Short Mode, P.C. Board Modification for Individual Operation
Page 9 Page 11

MSZ-FD09NA specifications

The Mitsubishi Electronics MSZ-FD09NA is a wall-mounted split-type air conditioning unit that exemplifies the brand's commitment to efficiency, comfort, and advanced technology. This unit is designed to provide optimal cooling and heating solutions for residential and light commercial spaces, ensuring a comfortable environment year-round.

One of the standout features of the MSZ-FD09NA is its impressive energy efficiency rating. With a high SEER (Seasonal Energy Efficiency Ratio) rating, it utilizes less energy while maintaining high performance, which can lead to significant cost savings on utility bills. This unit adheres to modern energy conservation standards, making it an environmentally friendly choice that appeals to eco-conscious consumers.

The MSZ-FD09NA is equipped with Mitsubishi’s advanced inverter technology, which allows the compressor to adjust its speed according to the desired temperature. This ensures that energy is used efficiently and that fluctuations in temperature are minimized, resulting in enhanced comfort levels. The inverter technology also helps in reducing noise levels, creating a quieter operation compared to traditional HVAC systems.

Another remarkable characteristic of the MSZ-FD09NA is its sleek and modern design, which seamlessly integrates into various interior décors. The unit is available in a clean white finish, making it an unobtrusive addition to any room. Furthermore, it has a compact design that maximizes floor space while providing powerful performance.

The unit also features cutting-edge air filtration systems designed to purify indoor air. With a multi-stage filtration process, including a catechin filter and an anti-allergen enzyme filter, the MSZ-FD09NA effectively captures dust, allergens, and other airborne particles. This feature is particularly beneficial for those with respiratory issues or allergies, contributing to a healthier living environment.

In addition, the MSZ-FD09NA is compatible with smart control options. Users can control their air conditioner remotely through a smartphone app, making it convenient to adjust settings from anywhere. This smart technology allows for programmable scheduling, enabling users to optimize the unit's operation based on their lifestyle.

In summary, the Mitsubishi Electronics MSZ-FD09NA stands out due to its energy efficiency, advanced inverter technology, modern design, high-quality air filtration, and smart control options, making it an excellent choice for those seeking reliable heating and cooling solutions.
Top Page Image Contents