I ÷ J

OPBMTiON

OvenCon ol, Clock, and Timer(cont.)

÷
Ifthe display flashes an "F" followed
by a number and beeps continuously,
you have a function errorcode.
Notethe number after the "F." Turn
the oven controlknob to the OFF
position. Disconnect all power tothe
range for at least 30 seconds and
retrythe oven operation. Ifthe "F"
displays during aself-clean cycle,
check the oven door latch. Makesure
the latch is moved to the right as
far as it will go. Turn the OVEN
CONTROL KNOBto the OFF
position. Allow theoven to cool 1 hour
and retry the oven operation. Ifthe
problem repeats, call for service,
Advise the technician what the
flashing code was.
When the power to your range is
turned on for the firsttime, or if you
experience apower failure, the
display will flash "PF." By touching
the CLOCK pad, the display willflash
"12:00."Touch the CLOCK pad again
andfollow the instructionstoset the
clock.Any operation set beforea
power failure will need to be reset.
The oven willautomatically shutoff
if it has been left on for more than
12 hours.
To deactivateorreactivatethe
automaticshutoff,touchand hold the
MIN UPand DOWN arrowpads for
about4 seconds, ÷
11