Kenmore 911.93601000, 911.93582, 911.93608, 911.93508, 911.93588, 911.93602 manual Iiiiiiit, To Remove

I

÷

CAREANDCLEANING

RemovableParts (cont.)

CLEANING MATERIALS

•Dishwashing detergent

•Warm water

•Scouring pad or soap-filled steel-wool pad

Bump

In

Rack

Rekmd Guide

Back of

the Rack

TO REMOVE

1.Pull the racks out to the stop position.

2.Pull up the front of the rack and slide under the bump of the rack guide.

TO CLEAN

Clean with warm water and detergent For hard-to-remove stains, gently scrub with a scouring pad or a sosp-filled steel-wool pad. Rinse well,

TO REPLACE

1.Place the raised back of the rack onto the rack guides,

2.Lift the front of the rack until the raised back slides under the bump of the rack guides.

3.Slide the rack all the way back.

[iiiiiiit'--_ I

TO REMOVE			Hinge Lock
1.	Fully open the		(Unlock_l
			PoJtton)
	door.
2.	Push the hinge
	locks	down
	toward the door
	frame,	to the Slot
	unlocked
	position. This
	may require a
	flat-blade
	screwdriver.		Arm
3.	Firmly grasp both
	sides of the door
	at the top.
4.	Close door to the
	door removal
	position,
5.	Lift door up until		÷
	the hinge arm is
	clear	of the slot.

Removal Pooltlon

TO REPLACE

Bottom Hinge

1.Firmly grasp both Edge of Arm sides of the door

at the top

2, With the door at

the same angle as the removal

position, seat the indentation of the

hinge arm into
the bottom edge	of
the hinge slot.	Indoctatlon

26

m

I '6 ÷ I