Mitsubishi Electronics MSZ12UN AIR Flow Velocity and Dire, Recommended horizontal vane range

AIR FLOW VELOCITY AND DIRE

AIR FLOW velocity and direction can be selected as required.

˚C

CLOCK

AMPM

AMPM

ON/OFF TOO TOO

WARM COOL

■To change the AIR FLOW velocity, press the FAN button.

Each time the button is pressed, the fan speed is

changed in sequence: (Low) → (Med.) → (High)

→ (AUTO)

•Use the (High) notch to cool/heat the room more.

•If the operating sound of the air conditioner disturbs your sleep, use the (Low) notch.

■To change the AIR FLOW blowing direc- tion vertically, press the VANE button.

Each time the button is pressed, the angle of the hori- zontal vane is changed in sequence: (1) → (2) → (3) → (4) → (5) → (SWING) → (AUTO)

SWING OPERATION

Use the swing operation for the air flow to reach all cor- ners of the room.

FAN	STOP
I FEEL COOL
VANE	START
HEAT DRY
MODE	HR.
	MIN.

Recommended horizontal vane range

Use the	(AUTO) position usu-
ally.
Use position	(1) or (2) in the

COOL or DRY mode and use posi- tions (3) to (5) in the HEAT mode when adjusting to your require- ments.

COOL	1
	2
DRY

3

HEAT4

5

RESET CLOCK

NOTE

■In the cooling operation, when the air conditioner is op-

erated with setting the horizontal vane to (4) or (5) for 1 hour, the AIR FLOW direction is automatically set to horizontal to prevent condensed water from dropping.

■Adjust the vertical AIR FLOW direction using the remote controller. If the horizontal vane is moved manually, it may cause trouble.

■In the heating operation, if the air flow temperature is too low or when defrosting is being done, the horizontal vane position is set to (1).