DB-15PDB9-15P

ENGLISH

3.2.2 Connecting to An Apple Macintosh Computer

Figure 6 shows the SC-B102 cable and AD-A205 Adapter to the video port in an Apple Macintosh.

1.Power off, both the monitor and the computer.

2.Set the DIP switches of Macintosh Adapter according to the setting chart. (See 7.3 Macintosh Adapter AD-A205 settings)

3.Connect the 15-pin (DB-15P) end of the AD-A205 Adapter to the straight 15-pin connector on the Macintosh video port on the CPU or on the video board.

4.Connect the sub-miniature 15-pin (DB9-15P) end of AD-A205 Adapter to the SC-B102 cable.

5.Connect the other end of the SC-B102 cable to the DB9-15P receptacle on the back of the monitor.

6.Power on the Macintosh, then the monitor.

7.After using the system, power off the monitor, then off the Macintosh.

Computer

Apple Macintosh

Computer

Macintosh

Adapter

AD-A205

Power Cord

CABLE SC-B102

 

 

 

Figure 6.

3.2.3 Connecting to a Unix Workstation & Third Party Graphics Card

Figure 7 shows the SC-B102 or “75Ω” coaxial cable (not supplied) connection to the graphics video card (PC-CAD and workstation).

1.Power off, both the monitor and the computer.

2.Connect one end of the SC-B102 cable or the “75Ω” coaxial cable to the output connector on the CPU, or on the video board.

3.Connect the other end of the SC-B102 cable or the “75Ω” coaxial cable to the DB9-15P receptacle or the BNC receptacles on the back of the monitor.

4.Power on the computer, then the monitor.

5.After using the system, power off the monitor, then off the computer.

High Resolution

Graphic Video Card

 

High Resolution

 

Graphic Video Card

“75Ω”

coaxial cable

Please see next page about BNC connection.

Power Cord

Cable SC-B102

Figure 7. - 1-14 -