Mitsubishi Electronics NFJ9905SKHUW Internal Preset Memory Capability, Power Management Function

1.2Internal Preset Memory Capability

To minimize adjustment needs, the factory has preset popular display standards into the monitor, as shown in Table 1. If any of these display standards are detected, the picture size and position are automatically adjusted. All of the factory presets may be overwritten by adjusting the user controls. The monitor is capable of automatically storing up to six additional display standards. The new display information must differ from any of the existing display standards by at least 1kHz for the horizontal scan frequency or 5Hz for the vertical scan frequency or the sync signal polarities must be different.

Table 1. Memory Buffer Factory Presets

	PRESET					Polarity
	TIMING			Fh (kHz)	Fv (Hz)	H	V
640	x	480	N.I.	31.5	60.0	–	–
640	x	480	N.I.	37.5	75.0	–	–
800	x	600	N.I.	46.9	75.0	+	+
1024	x	768	N.I.	60.0	75.0	+	+
1152	x	870	N.I.	68.7	75.1	–	–
1280	x	1024	N.I.	80.0	75.0	+	+
1280	x	1024	N.I.	91.1	85.0	+	+
1600	x	1200	N.I.	93.7	75.0	+	+

1.3Power Management Function

The monitor has the power management function which reduces the power consumption of the monitor when not in use. There are two reduced power level modes.

Stand-by mode

When the horizontal sync signal is off, after about 10 seconds the monitor is switched to a stand- by mode which reduces the monitor power consumption to less than 15W. When the monitor is in the stand-by mode, the screen is off and the power-on indicator will be amber.

After the horizontal sync signal is restored, picture will be displayed within a few seconds.

Suspend mode

When the vertical sync signal is off, after about 10 seconds the monitor is switched to a suspend mode which reduces the monitor power consumption to less than 15W.

When the monitor is in suspend mode, the screen is off and the power-on indicator will be amber. After the vertical sync signal is restored, picture will be displayed within a few seconds.

Power-off mode

When the horizontal sync signal and vertical sync signal are off, after about 10 seconds the monitor is switched to a power-off mode, which reduces the monitor power consumption to less than 8W.

When the monitor is in power-off mode, the screen is off, and the power-on indicator will be amber.

After both the sync signals are restored, picture will be displayed within several seconds.

ENGLISH

- 1-7 -