ENGLISH

1.4DDC

The monitor includes the DDCTM1 and DDCTM2B feature. DDC (Display Data Channel) is a commu- nication channel over which the monitor automatically informs the host system about its capabilities (e.g. each supported resolution with its corresponding timing).

DDC is routed through previously unused pins of the 15-pin VGA connector.

The system will perform “Plug and Play” feature if both, monitor and host, implement the DDC protocol.

1.5Location Considerations

When setting up and using the monitor, keep the following in mind:

*For optimum viewing, avoid placing the monitor against a bright background or where sunlight or other light sources may reflect on the display area of the monitor; place the monitor just below eye level.

*Place the monitor away from strong magnetic or electromagnetic fields, such as high capacity transformers, electric motors, large current power lines, steel pillars, etc....

Magnetism can cause distortion in the picture and/or color purity.

*Avoid covering the slots or openings of the monitor. Allow adequate ventilation around the monitor so the heat from the monitor can properly dissipate. Avoid putting the monitor into any enclosure that does not have adequate ventilation.

*Avoid exposing the monitor to rain, excessive moisture, or dust, as this can cause a fire or shock hazard.

*Avoid placing the monitor, or any other heavy object, on the power cord. Damage to the power cord can cause a fire or electrical shock.

*When transporting the monitor, handle it with care.

CAUTION

Keep your fingers away from the pivot area of the tilt/swivel base.

1.6Cleaning Your Monitor

When clean the monitor, please follow these guidelines:

*Always unplug the monitor before cleaning.

*Wipe the screen and cabinet front and sides with a soft cloth.

*If the screen requires more than dusting, apply a household window cleaner to a soft cloth to clean the monitor screen.

CAUTION

Do not use benzene, thinner or any volatile substances to clean the unit as the finish may be permanently marked. Never leave the monitor in contact with rubber or vinyl for an extended time period.

- 1-8 -

Page 8 Page 10
Page 9
Image 9
Mitsubishi Electronics NFJ9905SKHUW manual Ddc, Location Considerations, Cleaning Your Monitor
Page 8 Page 10

NFJ9905SKHUW specifications

The Mitsubishi Electronics NFJ9905SKHUW is a state-of-the-art power amplifier designed to deliver exceptional performance in various applications, ranging from audio systems to industrial equipment. This advanced amplifier is characterized by its high efficiency, compact design, and robust features, making it an ideal choice for both consumer electronics and professional settings.

One of the standout features of the NFJ9905SKHUW is its high output power capability, which enables it to drive demanding speaker loads effortlessly. With a power output of 2 x 50W, this amplifier caters to a wide range of audio applications, allowing for clear and powerful sound reproduction. Its ability to sustain performance at high output levels while minimizing distortion sets it apart from conventional amplifiers available in the market.

Incorporating cutting-edge Class A/B technology, the NFJ9905SKHUW balances the thermal efficiency of Class B amplifiers with the audio fidelity of Class A designs. This results in optimal sound quality across the entire frequency range, providing an immersive listening experience. The amplifier also features a high signal-to-noise ratio, ensuring that low-level audio signals are preserved without interference from unwanted noise.

Another important characteristic of the NFJ9905SKHUW is its advanced protection mechanisms. It integrates a variety of features such as thermal shutdown, short circuit protection, and overload detection. These safeguards contribute to the longevity and reliability of the amplifier, ensuring uninterrupted performance even under demanding conditions.

Moreover, the NFJ9905SKHUW is designed for versatility. Its compact form factor allows for easy integration into various systems, whether in home theater setups or professional audio equipment. The amplifier supports a wide input voltage range, making it adaptable to different power supply environments.

In conclusion, the Mitsubishi Electronics NFJ9905SKHUW power amplifier stands out for its impressive power output, sound quality, and advanced protection features. Its innovative design and technology make it suitable for various demanding applications, from high-fidelity audio systems to professional audio solutions. With its combination of performance and reliability, it is a remarkable addition to Mitsubishi Electronics’ lineup of audio products.
Top Page Image Contents